Tiguan cruise control missing cluster icon, vag code request.

[Toki]

Hello!

I've just retrofitted the cruise control on my tiguan my2010, the cc works good, but I only have the green light on the tachometer indicating that the cc is working and I'm missing the speed on the cluster, so can someone with cc fitted and fully working post his vag coding? Maybe I've something wrong or not coded, I think the channels are 01-engine and 16-steering wheel, correct?

Cheers!

[Umai Naa!!]

Some didn't have it, depends on the year model. Same goes for Golf.

[MGV]

Mine's a base model 2010 & has the cruise speed over-riding the odometer readout when in use at the bottom left of the MFD. I do have comfort pack, though.

[Toki]

Thanks for the info!

MGV, yours is original or retrofitted?? Do you have a vag to make a scan and post the coding?

[MGV]

Yep, mine is OE. Sorry, don't have a cable for scanning.

Best of luck getting yours sorted.

[Bambazonke]

Toki if I remember correctly it is the adaption settings of the #17 instrument panel and as Umai Naa!! said only the recent panels versions support this

[Toki]

Mmm, it's strange because on various forum I see a lot of cc retrofitted with green light AND icon on MFD on old MY09 tiguan, that's older than mine, so I thought of a wrong coding...

Today or tomorrow I'll have the chance to check it with vag...

Cheers.

[NZTiguan]

I think only the white mdf had this not the red. Certainly my 2008 with red mdf didn't have it and my 2013 with white mdf does !!

Cheers

[Toki]

Just to clarify, mine is a white MFD in a 2010 Tiguan.

I found this thread on the forum that confirm that a 2010 Tiguan with white MFD can do it, the question is how

Cruise control on the MFD

Cheers.

[YellowLemon]

Mine's a base model 2010 & has the cruise speed over-riding the odometer readout when in use at the bottom left of the MFD.

Toki could you post your own VCDS scan? Did you have to change the SWCM to retrofit CC, or did you just swap the stalk to include the CC switches? I have this function working (CC display in white MFD) a base trendline model early 2008 Tiguan TDI in Australia with stock cruise control and all Mk5 electronics, except:

1) Swapped the SWCM from 1K0 953 549 "BG" version to 1K0 953 549 "CH" version @ SW 0111 (for G85 steering angle sensor near slipring, not in steering rack) for mk6 MFSW Golf GTI retrofit.

2) instrument cluster swap from 5N0 920 870 D @ SW 2220 (red MFD VDO with micronas chip) to 5N0 920 871 B @ SW 0206 (white MFD VDO with NEC chip)

Everything else, ie: CECM, CCM, CAN gateway is all low-line ancient mk5 based rubbish.

CONCLUSION

• The function must therefore either be coming from SWCM or Instrument Cluster. I never had to do any coding to set this up, it just worked. I get CCdisplay in white MFD with little CC icon, and no more green indicator light in the speedo.
• All "CH"-version SWCM have SW = 0111 AFAIK according to ross-tech website. I got the CH SWCM from eBay china for AUD$60 posted. Installation required removal of steering wheel IIRC. Link to ross tech: Steering Wheel Control Module Versions - Ross-Tech Wiki
• Also my 'new' retrofit white MFD SW is 0206 which is the lowest version I have seen for this part number, so unlikely to be SW version issue (though may be entire cluster part number)
• Perhaps it is due to coding of cluster? Mine is set to "7 - AUSTRALIA", see coding below. I think some regions behave differently, like US setting means you don't get large speed display in white MFD etc. I get the large speed display (need to have Alt. Speed unticked in settings menu) Note: when you change region, sometimes RNS510 radio loses it's coding.

MY CODING

Address 16: Steering wheel        Labels: 1K0-953-549-MY9.lbl
   Part No SW: 1K0 953 549 CH    HW: 1K0 953 549 CH
   Component: J0527           056 0111  
   Coding: 0001632

   Subsystem 1 - Part No: 5K0 959 542 B  Labels: 3C8-959-537.CLB
   Component: E221__MFL-TAS   H30 0036  
   Coding: 00000131

No fault code found.

Address 17: Instruments (J285)       Labels: 5K0-920-xxx-17.clb
   Part No SW: 5N0 920 871 B    HW: 5N0 920 871 B
   Component: KOMBI         H05 0206  
   Coding: 710E00
   ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A04040
   ROD: EV_Kombi_UDS_VDD_RM09_VW21.rod

No fault code found.