Bi-Xenon Headlights for Tiguan - Retrofitting

[Naresh]

Shouldn't that be 2012+ as these headlamps are from the facelifted Tiguan which was officialy launched last year. There are retrofit versions out there made by 3rd parties but these would not fit a 2011 model Tig.

[Euro Car Upgrades]

hi mate, some of the 2012 Tigs were still produced in 2011 in Germany hence I put the 2011 in it

[ido09s]

So is this meant to be a for sale advert?

[Euro Car Upgrades]

correct

So is this meant to be a for sale advert?

[tigger73]

correct

How about a price then?

And are these for RHD?

I've seen a lot of lights for sale but most are for LHD which will be illegal if fitted to RHD car.

Also be interesting to find out cost of fitting as I understand retrofitting bi-xenons is not cheap if you do it properly/legally.

Finally are you able to source anything for 2008-2011 models?

[Dr freedom]

price check aisle 10 thanks

[Euro Car Upgrades]

hi guys, apologies for my late reply.
The lights are not super easy to fit but they are not too difficult.
We do have installers in most major Aussie cities. Ligghts are brand new Aussie spec.
The cost to fit is 400-800 depending on location in australia.
We have RNS 510 units, cameras and Bluetooths for the previous model 2008-2011

[Sanman]

hi guys, apologies for my late reply.
The lights are not super easy to fit but they are not too difficult.
We do have installers in most major Aussie cities. Ligghts are brand new Aussie spec.
The cost to fit is 400-800 depending on location in australia.
We have RNS 510 units, cameras and Bluetooths for the previous model 2008-2011

Check the ADRs - Xenons are not legal fitment unless they have washers and self levellers.

[davc88]

putting the headlights in are easy with the right harness. installing the AFS system is the hard part. if $400 is inclusive of the whole thing then its pretty cheap. nvm by the looks of it your not selling the AFS system with the leveling arms...

[Hillbilly]

putting the headlights in are easy with the right harness. installing the AFS system is the hard part. if $400 is inclusive of the whole thing then its pretty cheap. nvm by the looks of it your not selling the AFS system with the leveling arms...

Was another thread about fitting these to something and to do it with the washers and levellers was well into 4 figures and a lot of time