Volkswagen Golf/Jetta SAT NAV

**ZavodVrchlabi** · 03-03-2010, 11:21 PM

How much would you think an installer will charge to fit a double din unit like these?
they've got Luna down in Perth , any other installers recommended that won't throw you out of the store if you didn't buy the unit off them

**Cupra** · 04-03-2010, 07:15 AM

Originally Posted by ZavodVrchlabi

How much would you think an installer will charge to fit a double din unit like these?
they've got Luna down in Perth , any other installers recommended that won't throw you out of the store if you didn't buy the unit off them

The 9000 & the 9000-1 are dead easy to install & there are some 'how to' in the forums with great photos to help. I've done 2 with reversing cameras & the hardest part was putting the trim back after running the wires for the camera.

Phil

**rcocu** · 22-03-2010, 08:28 PM

Hello all , l have a AVC9000-1 satnav and l wish to update my maps. l have tried to find rob but l cannot find him at his website so is he still around, if not were can l buy updated maps from. At the moment l am using igo maps but l am open for suggestions.

Thank you
Robert

**team_v** · 22-03-2010, 08:31 PM

Originally Posted by rcocu

Hello all , l have a AVC9000-1 satnav and l wish to update my maps. l have tried to find rob but l cannot find him at his website so is he still around, if not were can l buy updated maps from. At the moment l am using igo maps but l am open for suggestions.

Thank you
Robert

I heard that he has ceased work due to illness either personal or a family member.

**Paul_OH** · 22-03-2010, 10:33 PM

Aah, spewin. I was looking for his details also as I need to buy a new iPod cable. Sorry to hear though and hope all gets sorted out for him.

**rcocu** · 23-03-2010, 04:49 PM

Yeah, l am sorry to hear about rob too,well l guess l will have to look elsewhere,

Thanks for the replys

Robert

**Jado** · 24-03-2010, 12:39 PM

Thanks for the heads up regarding Auspack no longer in business.

Ive been trying to contact Rob for a week but have had no luck.

2 months ago I bought 2 headunits off him (AVC 9000-1). They were both installed worked fine for awhile however one of them no longer work.

The sound signal does not make it to the amp/speakers. Ive reinstalled my stock headunit again which works fine.

How would I go about making some sort of warranty claim off him? He didnt send me an invoice when I requested one so I'm not sure what my options are here.

Help!

**POLARBEAR666** · 24-03-2010, 11:16 PM

Originally Posted by Jado

Thanks for the heads up regarding Auspack no longer in business.

Ive been trying to contact Rob for a week but have had no luck.

2 months ago I bought 2 headunits off him (AVC 9000-1). They were both installed worked fine for awhile however one of them no longer work.

The sound signal does not make it to the amp/speakers. Ive reinstalled my stock headunit again which works fine.

How would I go about making some sort of warranty claim off him? He didnt send me an invoice when I requested one so I'm not sure what my options are here.

Help!

I would shortcut the issue and find an electronics nerd place and get them to just open it and find what is broken.

I had a custom ECU rally computer for my WRX fixed by some electronics nerds.. apparently they just open it and check all the connections etc , test where the signal is dying and replace that item.

**Moonan** · 25-03-2010, 06:13 PM

As this thread has been resurrected, it's time to ask.......
Now that Rob has gone (and his website is "vacant" on the optus system), is there a consensus on who should be the "supplier of choice" and what is the best option to buy?
6050 rev 3? or what??

cheers,