V6 Australia Maps

**Parkesy** · 10-05-2013, 05:15 PM

Originally Posted by FJ Steve

what version Firmware are you running?

Firmware is 4120

**Hillbilly** · 10-05-2013, 05:16 PM

That looks like its in night mode Never had mine like that. Look in your settings and see what its set at Shouldn't look like that in day mode

Have just been for a drive and mine shows this

In 2D mode shows streets all around

In 3D mode with zoom at 50m shows adjacent streets about a block in front and to each side and they come up ahead of me.

Cut it in to 25 m and very few show up.

I put the DVD in and it didnt make any difference to what was shown.

Where did you download the image from Mine is Ok as its what I used for mine.

Something is radically wrong and it may be in the settings by the look of those pics Just been out and put mine into night mode and the streets come up same as in day mode So cant figure yours out but is definitely in night mode

**Ferni** · 10-05-2013, 06:00 PM

Those photos are actually running from DVD (Its how I've been testing after rolling back to V5 on HDD). I figure once it works fine from DVD then i can install to HDD.

The photos are from 6am this morning when it was still dark, hence night mode... Day mode doesn't have street names either.

I'm running firmware 4120

I downloaded the maps twice from this thread (RNS510V6Maps.iso), MD5 hash of the ISO was the same on both which is 8A9F7D1F4F464CBCDCF7C9FC7337214E if you want to check your ISO MD5? (710,770,688 bytes)

Thanks for trying to help

**FJ Steve** · 10-05-2013, 07:10 PM

my V6 .iso is 694,112kb

**jords** · 10-05-2013, 07:15 PM

Maybe the details are set to minimum. Can't remember of the top of my head what they actually do, but maybe it's set to minimum details, hence no street names. Is the street name displayed in the MFD when driving along?

**ian** · 10-05-2013, 07:21 PM

Originally Posted by jords

Maybe the details are set to minimum. Can't remember of the top of my head what they actually do, but maybe it's set to minimum details, hence no street names. Is the street name displayed in the MFD when driving along?

yes it does . if your driving on the pacific highway it will say so in the MFD.
Mine is also 694.112 kb

**Hillbilly** · 10-05-2013, 07:52 PM

Originally Posted by jords

Maybe the details are set to minimum. Can't remember of the top of my head what they actually do, but maybe it's set to minimum details, hence no street names. Is the street name displayed in the MFD when driving along?

Cant set those details only the number of POI you can put in HAve just spent half an hour fiddling and cant find any way to turn on or off what is shown on the base map.

The ISO I put up definitely works as mine is going fine. Only other thing I can think of is put everything back to factory settings and start again Or maybe be as a last resort Format the drive but thats a bit radical and worrisome.