RNS510 replacement options.

[JimmyT]

Hey guys,

My Golf MKV currently has the rns510 installed i believe and im thinking of swaping it over for an aftermarket unit instead that has bluetooth/usb support for my iphone. Anyone got some good suggestions that would give me that functionality?

[Martin]

The Hawk has comprehensively covered this topic - use search

[kamold]

You can just add an oem Bluetooth/MDI adapter that will accomplish that and remain factory, should you with to go down that path.

[arcadelt]

To add to kamold's suggestion. My MkV has a 9w7 bluetooth module and it allows for bluetooth media from my iPhone 6 perfectly. I thought about adding the MDI module, but frankly bluetooth works well enough for me. I also have a FIS Link module to give me phone functionality on the red MFD. It's a bit flaky, but works reasonably well. The all up cost of those parts could come to just over $500 (exchange rate is the kicker at the moment) plus the cost of installation.

[JimmyT]

thanks guys, reading up on the 9w7 unit seems like the best option for me

[Marongiu__]

hey guys,

i also have an RNS510 fitted in my 2009 golf 118TSI MK5 1.4l, and im looking to install a Bluetooth 9w7 kit,

however i am unaware of the location in which the kit is placed. (where in plug is for it) thanks

[kamold]

You need to buy a kit that includes a harness. The harness will include the plug for the new BT unit, which will connect to both the rns and your cars wiring harness.

Sent from my HTC One_M8 using Tapatalk

[The_Hawk]

Here is a nice read for you if you're going down the bluetooth path:
Bluetooth-9w7 module voice control retrofit, swap, install, and FAQ | VW TDI forum, Audi, Porsche, and Chevy Cruze diesel forum

And the klit itself:
Volkswagen Bluetooth 9w7 Premium Retrofit kit VW OEM 7P6035730 -Euro Car Upgrades

[chris_j26]

To add to kamold's suggestion. My MkV has a 9w7 bluetooth module and it allows for bluetooth media from my iPhone 6 perfectly. I thought about adding the MDI module, but frankly bluetooth works well enough for me. I also have a FIS Link module to give me phone functionality on the red MFD. It's a bit flaky, but works reasonably well. The all up cost of those parts could come to just over $500 (exchange rate is the kicker at the moment) plus the cost of installation.

Does the FIS Link module work with the half height red MFD?

[arcadelt]

Does the FIS Link module work with the half height red MFD?

I doubt it as the information takes up the entire full-height screen: but that is not a definitive answer, just an observation. You will need to do your own research or wait for someone more knowledgeable to provide a response.