Support VWWC

Page 1 of 3 123 LastLast
Results 1 to 10 of 24

Thread: RNS510 installed, 2 problems....

  1. #1
    Join Date
    Mar 2011
    Location
    Sydney, NSW
    Posts
    74
    Users Country Flag

    RNS510 installed, 2 problems....

    Got my RNS510 installed yesterday but have a couple of problems :

    1) Bubbles on the screen, see this picture



    Luckily the top 2 bubbles have dissapeared overnite but I still have the one in the bottom corner. I've tried to push it out with a credit card but it still remains. You can 't see it when the map is on but still I would rather it not be there. Anyone got any idea how I can get rid of it ?

    2) Bluetooth not working correctly. My Bluetooth (VGA098900) worked perfectly with my previous setup but now I cannot hear the callers voice, they can however hear me. Should really have tested this before I left the installer so will unfortunately have to go back and get him to fix it.

    Anyway apart from these issues it's a great unit, well worth the outlay !

  2. #2
    Join Date
    Feb 2011
    Location
    Canberra, ACT
    Posts
    837
    Users Country Flag
    when you used the credit card - were you able to 'move' the bubbles or did they appear deeper under the surface ?

    If you can move them - it's like a protective film for the screen has been left on...

    ...is it worth trying to prick it with a pin right in the lower left corner ? - dont do it if your not sure !! - just a thought (committed to text)
    MY18 GOLF 110TSI I HIGHLINE I Indium I Panoramic Sunroof I DAP I IP
    MY18 TIGUAN 162TSI I R-LINE I Ruby I DAP I IP

  3. #3
    Join Date
    Mar 2011
    Location
    Sydney, NSW
    Posts
    74
    Users Country Flag Thread Starter
    Yes the bubble moves but I don't think it's the protective coating because the installer peeled that off prior to installation.

    As the two smaller bubbles dissapeared I'm hoping that the last one will too given a few days. Fingers crossed anyway !

  4. #4
    Join Date
    Jul 2010
    Location
    Sydney
    Posts
    1,156
    Users Country Flag
    Quote Originally Posted by Jaap74 View Post
    Yes the bubble moves but I don't think it's the protective coating because the installer peeled that off prior to installation.

    As the two smaller bubbles dissapeared I'm hoping that the last one will too given a few days. Fingers crossed anyway !
    Quite frankly, looks a bit dodge!

    Never heard of bubbles on an actual backlit screen before.

    FWIW, I'd be returning it for a refund or exchange.
    MY11 Tiguan 147TSI (SOLD)

  5. #5
    Join Date
    Jun 2008
    Location
    South Coast N.S.W.
    Posts
    838
    Quote Originally Posted by aussietig View Post
    Quite frankly, looks a bit dodge!
    Never heard of bubbles on an actual backlit screen before.

    FWIW, I'd be returning it for a refund or exchange.
    I agree with aussietig if it doesn't have a plastic protective cover on the screen then it has a problem with the LCD display, if possible return it as faulty. I'm a little surprised that the installer didn't notice this and if such he should have advised you it had a problem rather than continuing with the install As far as the bluetooth issue I would suggest that the voice volume needs adjustment from within the unit settings.
    Last edited by Russ59; 30-05-2011 at 08:02 AM.
    Russ

    2005 Subaru Outback 3.0 R Premium

  6. #6
    Join Date
    Mar 2011
    Location
    Sydney, NSW
    Posts
    74
    Users Country Flag Thread Starter
    I wonder what my chances are of the Lithuanian seller sending me another unit then paying the freight of the damaged one back ?? I shall ask and report back.

    As for the Bluetooth there are no settings within the RNS 510 for it as it's not the Premium Bluetooth.

  7. #7
    Join Date
    Jun 2008
    Location
    South Coast N.S.W.
    Posts
    838
    Quote Originally Posted by Jaap74 View Post
    I wonder what my chances are of the Lithuanian seller sending me another unit then paying the freight of the damaged one back ?? I shall ask and report back.

    As for the Bluetooth there are no settings within the RNS 510 for it as it's not the Premium Bluetooth.
    There is a setting for telephone volume, you'll find it under SETUP / VOLUME SETTINGS / TELEPHONE VOLUME. I don't know if this will help you or not but it might be worth a try
    Russ

    2005 Subaru Outback 3.0 R Premium

  8. #8
    Join Date
    Mar 2011
    Location
    Sydney, NSW
    Posts
    74
    Users Country Flag Thread Starter
    Quote Originally Posted by Russ59 View Post
    There is a setting for telephone volume, you'll find it under SETUP / VOLUME SETTINGS / TELEPHONE VOLUME. I don't know if this will help you or not but it might be worth a try
    I don't have that option under SETUP :




    Perhaps as my Bluetooth is different to yours ?

  9. #9
    Join Date
    Jun 2008
    Location
    South Coast N.S.W.
    Posts
    838
    Quote Originally Posted by Jaap74 View Post
    I don't have that option under SETUP :




    Perhaps as my Bluetooth is different to yours ?
    I don't have bluetooth with mine, I have been looking through options for you in the RNS510 manual (PDF format) maybe the sound problem is associated with the unit, perhaps another fault besides the LCD display issue ?
    Russ

    2005 Subaru Outback 3.0 R Premium

  10. #10
    Join Date
    Mar 2011
    Location
    Sydney, NSW
    Posts
    74
    Users Country Flag Thread Starter

    Quote Originally Posted by Russ59 View Post
    I don't have bluetooth with mine, I have been looking through options for you in the RNS510 manual (PDF format) maybe the sound problem is associated with the unit, perhaps another fault besides the LCD display issue ?
    I guess I will find out when I go back to the installer and he double checks the installation, what a pain

Page 1 of 3 123 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |