RNS510 Help with installation and canbus gateway

[robbie]

mikinoz you are being rude can you budd out please. i told you i don't know how to do it. wastegate can you please help me do the canbus and rns510 only please.

[mikinoz]

Mate, you need to have a look at what you are asking.

You want some help. I have told you that there is a lot of work there that can be mostly done DIY. I have also told you that it would be a days effort. You asked me if I would help you, and I said I would, but at a price.

You could use the following guides and do it all yourself as I said before.

Bumper:
HOW TO fit a genuine GTI bumper to a mk5 - uk-mkivs

Skirts:
How to fit R32/Gti Skirts to a MkV - uk-mkivs

CANBUS install:
CAN bus gateway removing, installing and upgrading – Volkswagen Golf | my-gti.com

RNS install:
Upgrading 2nd generation headunits (RCD 300, RCD 500, MFD2) to 3rd generation headunits (RCD 210, RCD 310, RNS 310, RNS 510, RCD 510) | my-gti.com

Best of luck with it.

[mikinoz]

Mate, you need to have a look at what you are asking.

You want some help. I have told you that there is a lot of work there that can be mostly done DIY. I have also told you that it would be a days effort. You asked me if I would help you, and I said I would, but at a price.

You could use the following guides and do it all yourself as I said before.

Bumper:
HOW TO fit a genuine GTI bumper to a mk5 - uk-mkivs

Skirts:
How to fit R32/Gti Skirts to a MkV - uk-mkivs

CANBUS install:
CAN bus gateway removing, installing and upgrading – Volkswagen Golf | my-gti.com

RNS install:
Upgrading 2nd generation headunits (RCD 300, RCD 500, MFD2) to 3rd generation headunits (RCD 210, RCD 310, RNS 310, RNS 510, RCD 510) | my-gti.com

Best of luck with it.

[robbie]

i would rather someone with experience mikinoz that knows what they are doing all i am asking is the canbus and rns510 and i will either pay them or a box of beer. and i am willing to travel.

i am talking about the rear gti bar mikinoz.

[benough]

i would rather someone with experience mikinoz that knows what they are doing

To be fair, Mikinoz has re built more than half of his MK1 in the last 12 months I have known him. I too have rebuilt half an engine but I'm still asking him for advice.

Further to that he has owned a MK5 and has done all of the above mods himself.

If you want experience he's your man but you gotta pay to play.

Rob. As has been the experience of most on this forum, is to try DIY first on your car, even to the point of cocking it up, then upon showing said initiative, people will help you, if you ask nicely and have a grasp of basic grammar.

[FJ Steve]

*subscribed*

Robbie...Maverick's website has all the info you need. Daunting as it may seem to you...it's really not that hard. If you find your skills are not up to scratch (pun intended), then man up and pay a commercial installer to do the job. That way, when it goes tits-up during peak hour, and you block the main arterial road in your local area...you can at least sit there, smugly satisfied, that you have a warranty.

[robbie]

sorry to hijack my own thread guys but where should i purchase the canbus gateway.

[wastegate]

Sorry Robbie, looks like I'm going to be too flat out this weekend and next.

You should be able to pick up an updated Canbus from eBay. Just like it says on Mavericks site.

[robbie]

cheers nick i will put the canbus in myself and the rns510 but can you code the canbus and rns510 when your free.

[robbie]

http://www.bold-sport.com/catalog/pr...products_id=20 is this the right canbus to buy for my car.