RNS-510 Custom Boot Screens

[kamold]

Ok maybe it's the sequence. I've been enabling downgrade prior to inserting the cd. Will give that a whirl.

[aussietig]

Ok maybe it's the sequence. I've been enabling downgrade prior to inserting the cd. Will give that a whirl.

Dodgey disk perhaps?

Have definitely re-loaded my custom logo after upgrading to FW 4020, by first enabling downgrade.

But my logo isn't one of johnc's.

Used this website instead that some member posted up a while back for my DIY logo:
http://netdata.be/iso/?

Does the job also!


BTW, still don't know wtf it's suppose to have improved.

Both visually and performance wise ... not noticing any difference/improvement on my C unit.

Certainly still lagging with showing my actual position and rotating map when cornering.

[kamold]

Yeah don't seem to be any real feature improvements looks like any changes are under the covers.

[brimway]

Firstly,thanks John for your work. Prior to updating to FW3810, I had no problems applying your boot screens. But after 3810, I can't get them to load. I've tried everything I can, burning at x1, allowing downgrade, and rebooting, but I still get this

Software Loading Error (010306)

.....and the cd ejects.

Seems to have something to do with FW3810??

Can you suggest anything please?

[A12DO]

Firstly,thanks John for your work. Prior to updating to FW3810, I had no problems applying your boot screens. But after 3810, I can't get them to load. I've tried everything I can, burning at x1, allowing downgrade, and rebooting, but I still get this

Software Loading Error (010306)

.....and the cd ejects.


Seems to have something to do with FW3810??

Can you suggest anything please?

^this. Same thing happened to my FW 3970

[kamold]

Create your own custom bootlogo for RNS510

Try firstly removing SDcard from the slot if there is one in there.
Try burning track-at-once.
Try using a DVD-R instead of CDR.

[brimway]

Create your own custom bootlogo for RNS510

Try firstly removing SDcard from the slot if there is one in there.
Try burning track-at-once.
Try using a DVD-R instead of CDR.

Thanks, tried all that now, still no joy

[kamold]

Try burning to a cd using xpcdburner and track at once recording.
Worked for me after some issues.

[brimway]

Try burning to a cd using xpcdburner and track at once recording.
Worked for me after some issues.

Thanks kamold, worked fine.

[jamerson]

Hey John,
i used the 38XX firmware for MY unite B
Originel
Part No SW: 1T0 035 680 B HW: 1T0 035 680 B
Become
HW= H02
SW = 3810
Part 1T0035680D

after that i can't recovery my Startup log, neither my HDD
can you please advise?