Results 1 to 5 of 5

Thread: RNS 510 CD/DVD Not Ejecting <HELP!>

  1. #1
    Join Date
    Jun 2011
    Location
    Sydney, NSW
    Posts
    146
    Users Country Flag

    RNS 510 CD/DVD Not Ejecting <HELP!>

    Hi Guys,

    I installed an eBay RNS 510 in my Golf this afternoon and there is a CD or DVD inside that will not eject. Resetting the unit makes no difference.

    It's suggested on other forums that a force eject can be done from VCDS - can anyone confirm this? I'm going to need help from a kind soul with VCDS anyway to code my steering wheel controls.

    Hoping someone can help...thanks.
    MY09 118TSI - SOLD

  2. #2
    Join Date
    Jun 2010
    Location
    Sydney
    Posts
    4,081
    Users Country Flag
    Hi happy to assist with VCDS coding. Its possible the unit it is 'transport' mode which would lock the drive I think? Not too sure however if it came down to it I could pull the RNS510 apart and the drive should have a manual eject mechanism.
    PM me to work out availability.
    2011 Skoda Octavia vRS TDI DSG wagon|Revo Stage 1|Race Blue|Leather|Dynamic Xenons w 6000K|9w7 BT|THA475 Amp+active sub|Whiteline ALK|RVC|
    2009 R36 wagon|Biscay Blue|RVC|Tailgate|ECU and DSG tune|LED DRL/Indicators|3D colour cluster|Quad LED tail rings|Climatronics upgrade|Dynaudio retrofit|B7 RLine Flat Steering Wheel|3AA CCM|TPMS Direct|B7 Adaptive Cruise with Front Assist|Discover Media retrofit|PLA 2.0|Lane Assist|BCM retrofit|High Beam Assist|DQ500

  3. #3
    Join Date
    Jul 2008
    Location
    Brisbane, QLD
    Posts
    344
    I have the same problem, if you get it working could you please advise what you did in VDCS?
    MKV GTI Pirelli

  4. #4
    Join Date
    Jun 2011
    Location
    Sydney, NSW
    Posts
    146
    Users Country Flag Thread Starter
    Well I've pulled the DVD drive out and there's a European Map DVD in it. But no way to manually eject (done by a motor).
    I'll try again in the morning while the unit is plugged in
    MY09 118TSI - SOLD

  5. #5
    Join Date
    Jun 2011
    Location
    Sydney, NSW
    Posts
    146
    Users Country Flag Thread Starter

    All working now. When I pulled the drive out there was a small circuit board that was dislodged (see below). I believe this may be the disk insertion sensor. Pushed it into correct position and then reinstalled drive. Disk ejected perfectly after that.
    I think my unit was dropped by Customs as there was damage to one of the corners

    By the way, a big thanks to kamold who did the coding for me this morning.

    MY09 118TSI - SOLD

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |