Support VWWC

Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: RNS 510 in 2010 models

  1. #1
    Join Date
    Jul 2009
    Location
    Adelaide
    Posts
    238
    Users Country Flag

    RNS 510 in 2010 models

    Can someone confirm or deny that a 4GB SDHC card will work in a 2010 model RNS 510?

  2. #2
    Join Date
    Jul 2009
    Location
    Highlands NSW
    Posts
    302

    SDHC Cards

    My manual for the RNS510 says

    "Memory Card Slot - The slot accepts cards with the dimensions 32mm x 24mm x 2.1mm. The unit supports SD and MMC memory cards with a capacity of up to 2GB and SDHC cards with a capacity of up to 32GB"

    Still have to purchase an SDHC card and see if it works but until then I will have to trust the manual.

  3. #3
    Join Date
    Mar 2009
    Location
    Melb
    Posts
    427
    I've successfully tested an 8gb microsd in a sdhc holder on my RNS-510 hw 02 and FW 2660

  4. #4
    Join Date
    Nov 2009
    Location
    Melbourne. Victoria
    Posts
    9
    1200 Firmware with mk6 rns510 b unit fails with 16gb SDHC, also pressing "i" button doesn't initialize voice controls but I have a mic installed for dealer fitted bluetooth option

    any ideas for either of these issues?

  5. #5
    Join Date
    Feb 2009
    Location
    Brisbane
    Posts
    1,518
    To OP - Not sure, try it and see! If it doesn't then the unit can be firmware upgraded to support them anyway. I am using a 32GB SDHC in my 09 RNS510 that is running firmware 2660.

    To Alexmk6gti - 1200 firmware doesn't do voice control. How do you know you have 1200? "i" button just does nav repeat I think from memory? If it IS 1200, it should read the 16GB card though. Make sure it's FAT32 formatted and that there are some MP3s on it.

  6. #6
    Join Date
    Jan 2008
    Location
    Brisbane
    Posts
    3,553
    Quote Originally Posted by alexmk6gti View Post
    1200 Firmware with mk6 rns510 b unit fails with 16gb SDHC, also pressing "i" button doesn't initialize voice controls but I have a mic installed for dealer fitted bluetooth option

    any ideas for either of these issues?
    1200 firmware is not upgrading all units to SDHC support whereas 2660 firmware is.

    Seems that some hardware revisions are not working with 1200. I don't suppose you have you HW : xx number from the top of the unit or out of VCDS?

  7. #7
    Join Date
    Nov 2009
    Location
    Melbourne. Victoria
    Posts
    9
    I just upgraded the firmware today to 2660 (i was under the impression that 1200 was newer since it had the newer release date on my-gti.com).

    Pressing the 'i' button still gives me nav instructions and pressing the 'mic' looking button on the steering wheel simply mutes the audio.

    I haven't tested my 16gb SDHC card since the update.

    Also is there a way to remove the region lock for DVD's - I believe because I've used the EU update it's now blocked region 4 DVD's - And i assume since a firmware update did this that a config file change on the update disk may be able to change that back? I know it's possible to do with a cable and ripping the headunit out but i'd rather not a)buy the cable b) take the unit out.

    btw this is a Mk6 GTI with a factory fitted RNS510 (so I assume it should be the latest hardware spec)

    The follow info was pulled from the test menu under 'version info' (probably an overkill with info but here it is..)


    delivery part number: 1T0035680C
    HW-Version: H11
    SW-Version: 2660
    SV SW-Version: C_EU_9242_t300
    HW Vehicle: 0xC201
    SW Vehicle: 0x44340010
    Bootloader Vehicle: 0x44340001
    HW Main: 00010002000201 ...
    SW Main: /L2.0_P16
    Bootloader Main: 00132013
    HW Radio: 0004
    SW Radio: EUR_CHN_141W
    Bootloader Radio: A2CSWDNL0010001
    HW DAB: -
    SW DAB: -
    HW DVDDecover: 004(0x04)
    SW DVDDecoder: _S0_S7.0
    HW DVD Drive Vers...: A2C53173871
    SW DVD Drive Vers...: VW1_C0_C.4.1
    IBOC HW Version: -
    IBOC SW Version: -
    HMI XML: 1.13.6.5 (EU)
    Last edited by alexmk6gti; 17-11-2009 at 01:11 PM. Reason: formatting

  8. #8
    Join Date
    Feb 2009
    Location
    Brisbane
    Posts
    1,518
    Quote Originally Posted by alexmk6gti View Post
    I just upgraded the firmware today to 2660 (i was under the impression that 1200 was newer since it had the newer release date on my-gti.com).

    Pressing the 'i' button still gives me nav instructions and pressing the 'mic' looking button on the steering wheel simply mutes the audio.

    I haven't tested my 16gb SDHC card since the update.

    btw this is a Mk6 GTI with a factory fitted RNS510 (so I assume it should be the latest hardware spec)

    The follow info was pulled from the test menu under 'version info' (probably an overkill with info but here it is..)
    the i and mic buttons will continue to do that until you tell the RNS to enable voice control using VAGCOM. http://www.my-gti.com/1234/volkswage...-voice-control

  9. #9
    Join Date
    Jan 2008
    Location
    Brisbane
    Posts
    3,553
    [QUOTE=alexmk6gti;418252]I just upgraded the firmware today to 2660 (i was under the impression that 1200 was newer since it had the newer release date on my-gti.com).

    1200 is the release that doesn't include all the new features of the 2660 release. This is for older hardware versions and includes the 32GB SDHC support and poi photos.

    Also is there a way to remove the region lock for DVD's - I believe because I've used the EU update it's now blocked region 4 DVD's - And i assume since a firmware update did this that a config file change on the update disk may be able to change that back? I know it's possible to do with a cable and ripping the headunit out but i'd rather not a)buy the cable b) take the unit out.
    You can't make the unit region free, you can however set it to a region. You have to use vagcom/vcds to do this.

    Changing the Region Code on the Volkswagen RNS 510

    The follow info was pulled from the test menu under 'version info' (probably an overkill with info but here it is..)
    2660 should operate fine with your unit as it's a revision C.

  10. #10
    Join Date
    Nov 2009
    Location
    Melbourne. Victoria
    Posts
    9

    My 16GB sdhc works now after the 2660 update
    I'll look into purchasing the VAGCOM cable to enable australian DVD region and voice recognition.

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |