Replacing RNS 510 with RCD 330+

[richmurphy]

My Aliexpress clone badge camera seems to be working fine with one exception - it'll pop out and turn the camera on when I start the car. It's working perfectly otherwise and didn't need a delay box. Anyone else have this issue? Instructions and seller are beyond useless.

[sn809]

My unit just arrived, will give it a go installing later in the day. Slightly disappointed the antenna connector is just a empty socket at one of the ends. But unit seems good physically.

@Richmurphy if it goes back in does it matter?

[richmurphy]

My unit just arrived, will give it a go installing later in the day. Slightly disappointed the antenna connector is just a empty socket at one of the ends. But unit seems good physically.

@Richmurphy if it goes back in does it matter?

It's not a huge issue but just doesn't seem right.

[sn809]

It's not a huge issue but just doesn't seem right.

Lol, could be a check like the needle going zero to max in display.

So my no name unit connected without a hitch and working with no major problems.

Keeping my current E series CAN gateway. The antenna 2 is to 1connector was just an empty socket on one connector so didn't use it, getting only one station on AM but will see how things go. I will get one of those proper 2 is to 1 connector. Two faults on VCDS-intermittent connection, but did not return on clearing.
Do I need to enable digital radio in installation list??

Now going for the rear camera install, wish me luck.

[sn809]

My Aliexpress clone badge camera seems to be working fine with one exception - it'll pop out and turn the camera on when I start the car. It's working perfectly otherwise and didn't need a delay box. Anyone else have this issue? Instructions and seller are beyond useless.

Did you use acc as power source? Could that be the reason? Its on aa soon as you start the car?