Hey mate, not sure about your connector, but with the connector I bought (26 PIN RGB to CVBS (RCA) AV Converter for Volkswagen Factory Original Camera Output to After Market Head Unit DVD-in Vehicle Camera from Automobiles & Motorcycles on Aliexpress.com | Alibaba Group) you need to wire the +12V to power and the red and yellow wires into pins 6 and 12 of the B block of the quad-lock connector. The red wire carries the signal for the camera to my knowledge.
Not sure if that helps or not?
Without a ground I'm confused as to how this converter is supposed to work. Did they supply a wiring diagram?
You are getting 12v from a known switched (as opposed to constant) 12v power source (accessories), but without a ground there is nowhere for the voltage to flow to....the 26pin multimedia connector does not have a ground pin.
The polarity of the fuse is important. Is the 'tail' of your add-a-fuse pointing up or down when installed in the fuse box?
The RGBS to composite converter requires a power source, it won't do any converting if you just plug in video in and video out.
I've used the one from Aliexpress and it works very well. You tap 12v power and ground from the quadlock harness going into the radio, then ignore the 'reverse' wire.
2011 Skoda Octavia vRS TDI DSG wagon|Revo Stage 1|Race Blue|Leather|Dynamic Xenons w 6000K|9w7 BT|THA475 Amp+active sub|Whiteline ALK|RVC|
2009 R36 wagon|Biscay Blue|RVC|Tailgate|ECU and DSG tune|LED DRL/Indicators|3D colour cluster|Quad LED tail rings|Climatronics upgrade|Dynaudio retrofit|B7 RLine Flat Steering Wheel|3AA CCM|TPMS Direct|B7 Adaptive Cruise with Front Assist|Discover Media retrofit|PLA 2.0|Lane Assist|BCM retrofit|High Beam Assist|DQ500
My thoughts too, I didn't know how exactly it's supposed to be powered as such.
Polarity is fine, I had it the right way.
Yeah I know, the fuse I tried was the stereo and cigarette lighter fuses, both were working when I replaced it with the fuse holder so I assume there's power running through the fuse.
I might look at what you are currently using then, and see if that works. Thanks for the help!
Sent from my SM-G955F using Tapatalk
Hey guys, need a little help.
From what i gathered, the 187B model is the one that comes with Android Auto and Car play.
Im looking to purchase this one:
Crngiar6.5" MIB Carplay App Car Radio RCD300 RCD510 RCD330 RCD330g Plus For VW Tiguan Golf 5 6 Jetta MK5 MK6 Passat Polo Touran-in Car Radios from Automobiles & Motorcycles on Aliexpress.com | Alibaba Group
My car is a 2007 golf GTI.
Will i need both the ISO quadlock and CAN bus? if so can i purchase this?
Aliexpress.com : Buy RCD330 Plus MIB RCD330G Plug&Play ISO Quadlock Adapter Cable Wire CANBUS Simulator For VW Golf Jetta 5 6 MK5 MK6 Passat B6 Polo from Reliable simulator cable suppliers on HEYCAR UPGRADE CLUB Store
Is this anything else i would need to be concerned about?
From my understand, the steering wheel buttons will not be usable?
Thank you kindly
The WeTransfer link are down (Transfer deleted)
Could someone re-upload, please?
Thanks
---
I've found
LINKS:
5515 RED: std_plus_pss-6.5inch_170421 5515 _VW_PQ_GP.tar - Google Drive
5314 RED: std_plus_pss-6.5inch_1014 5314 _VW_PQ_GP.tar - Google Drive
Last edited by 0AM; 28-12-2017 at 01:49 AM.
A few questions.
On page 21 someone wrote
The actual unit with OEM Android Auto is 6RF 035 187C o 6RF 035 187E
I can't see these on aliexpress. So I just get the noname 187B? Any one recommend a good seller at the moment? Previous links are no longer valid.
I've got a mk5 gti with mk6 steering wheel so the buttons will work. Does the mfd still show the phone info and can a call be answered via the accept function?
Last edited by pw1500; 29-12-2017 at 07:41 PM. Reason: Forgot quote
Bookmarks