Post your system!

[ScienceVR6]

What are you running, what do you think of it?

Things you would like to change?

Tell us here!

[ScienceVR6]

Currently, im using a

Clarion DXZ 656 mp head unit
A pair of MPS 1700 VDO Dayton Splits in the front doors,
A pair of Clarion 4" co-ax speaker running as a mid/ tweeter in th dash
A pair of VDO 6.5" co-ax in the rear doors.

At the moment im not running any subs, as ive just sold them, and tomorrow i will order my new subs. A pair of SB15xb Clarion 15" subs.

My amps are an old US Audio 554z 4 channel, a tough and reliable amp, that is currently only powering my front speakers

I also have a Directed Xtream 1500x mono bloc that has proven to be a very nice amplifier, but it is a little small, at only 220W rms at 4ohms. I would like a little more extra power so that i dont have to run the amp so hard.


The Headunit is a very nice peice of gear, with full RCA outs and an RCA aux in, a motorised face, and 4x52 amplifier. the only thing i dont like about it is the lack of a parametric equaliser, and a lack of hi-pass filters.

[BlackVr6ix]

Great Idea Science!

I just hope everyone has a good alarm that is posting all their gear.

At the moment i have the following

ol' school clarion tape deck (cant decide on what deck to replace the VRX677 i had)
Polk Momo MMC6500 splits in the front
Polk DB650 Coax in the rear

and in the shed a couple of Polk Momo MM2124's, couple of clarion pa10s in a dual slot ported box, box of random headunits, half a dozen random amps, meters and meters of cable and rca'a.

Guess thats what you get from fitting stereo's for a few years.......

[jasn78]

Running Alpine head unit some1 pinched my eclipse one have boston rally 6 inch splits in the front and a xtant 4 channel amp no sub atm but have a boston rally 10 at home considering putting it in but dont like the idea of loss of boot space

[BL33SU]

i have an older version kenwood deck with the cd stacker in d boot which is annoyn.

i have amped my stock front and rears with a pheonix gold 4 channel. 50rms x4

currently using my old xplod 12" sub, was powered by a jaycar mono for awhile and now back to an old 2 channel until i get money to buy a mono.

4gauge wiring to distro to 8gauge

so, hopefully later i will have a jaycar mono again, running a sub with about 600-800 rms . either herts, soundstream or sumthin, or maybe 2 type r's.

[MattyT]

At the moment I have:

Blaupunkt CD300 HU (lump of ****)
Pioneer 6.5" splits in ze front (lumps of ****)
Pioneer 6.5" coax in ze back (lumps of ****!)

As you may be able to gather, I don't think too highly of this system!
Bugger all clarity, weak volume, very very crap HU interface with an excessively twitchy volume knob.
Also, thanks to the thin tires on the car I think it suffers a lot from road noise and of course that lovely VR6 burble

Current sitting in my bedroom, and as of Thursday will be happily in the car:
Clarion DXZ766USB HU (w00t!)
Alpine Type-X 6.5" splits in ze front
Alpine 502T (2x75w) giving the splits what they need
Audison connection wiring for the whole lot

At some stage I'll whack in some dynamat in the doors as well.