Firmware updates for RNS510 units in Australia/NZ

[FJ Steve]

Not this experience, but I did have some issues when I upgraded the A unit in the R32. IIRC....I went back to FW1100, and incrementally upgraded it t0 4020 (highest you can go with an A unit).

Absolutley no issues with the unit now. Performs very well.

[Vvillie]

I have 1T0035680B and just upgraded to FW38xx without any issues. I also installed V6 maps without any issues, however I noticed I am not getting any speed camera notifications (they are not listed in my POIs either).

I tried importing a custom POI from this forum and noticed the option was disabled. Could anyone please advise which firmware I can upgrade / downgrade to in order to activate POI?

My device is a 1T0035680B HW03.

Cheers

[mark4323]

Not this experience, but I did have some issues when I upgraded the A unit in the R32. IIRC....I went back to FW1100, and incrementally upgraded it t0 4020 (highest you can go with an A unit).

Absolutley no issues with the unit now. Performs very well.

I also have a problem were every time I start the car the map zoom goes back to 50m. It doesn't remember its setting.

[kamold]

I have 1T0035680B and just upgraded to FW38xx without any issues. I also installed V6 maps without any issues, however I noticed I am not getting any speed camera notifications (they are not listed in my POIs either).

I tried importing a custom POI from this forum and noticed the option was disabled. Could anyone please advise which firmware I can upgrade / downgrade to in order to activate POI?

My device is a 1T0035680B HW03.

Cheers

You already have the right firmware.
You need to follow the instructions carefully including the naming and location of the poi file on the SDcard in order to import it.

[mark4323]

Not this experience, but I did have some issues when I upgraded the A unit in the R32. IIRC....I went back to FW1100, and incrementally upgraded it t0 4020 (highest you can go with an A unit).

Absolutley no issues with the unit now. Performs very well.

Where do I find a 4020 link? the ones at the beginning of the thread are no longer working

[Hillbilly]

Where do I find a 4020 link? the ones at the beginning of the thread are no longer working

Will upload a copy in the morning for you Will post link when its done

[Hillbilly]

Here you go Firmware Vers 4020

https://docs.google.com/file/d/0B3Cr...it?usp=sharing

[mark4323]

Here you go Firmware Vers 4020

https://docs.google.com/file/d/0B3Cr...it?usp=sharing

Thanks! Downloading now.

[kamold]

All the original links work...please check before having someone spend the time re-uploading.

[mark4323]

All the original links work...please check before having someone spend the time re-uploading.

4020 link on p1 still isn't working for me. I got it from post 377 thanks