Firmware updates for RNS510 units in Australia/NZ

**tonymy01** · 24-03-2013, 10:03 AM

you missed his point. look up impotent vs important...

**Hillbilly** · 24-03-2013, 10:24 AM

Originally Posted by tonymy01

you missed his point. look up impotent vs important...

Didnt miss anything, was poking fun at his typo. Seems you didnt see the humour in it.

**omega31** · 24-03-2013, 10:43 AM

Originally Posted by Hillbilly

Didnt miss anything, was poking fun at his typo. Seems you didnt see the humour in it.

Guess I deserve that

,

**tonymy01** · 24-03-2013, 10:54 AM

Originally Posted by Hillbilly

Didnt miss anything, was poking fun at his typo. Seems you didnt see the humour in it.

I meant omega missed the point about you poking fun! I did see the humour in it, not sure why you thought I was replying to you when my post was after omega's one?

**Hillbilly** · 24-03-2013, 11:21 AM

Originally Posted by tonymy01

I meant omega missed the point about you poking fun! I did see the humour in it, not sure why you thought I was replying to you when my post was after omega's one?

Yeah ok most include a the quote so as to know what you are replying to.

Wasnt sure which you were referring to so presumed it was me.

A reply without quotes is a reply to the thread subject.

One with quotes is to the included previous post

**tonymy01** · 24-03-2013, 11:43 AM

Originally Posted by Hillbilly

One with quotes is to the included previous post

You are lecturing me about forum etiquette, but you have done a full quote without trimming up there in the thread. I am posting from my phone, far easier to reply with no quote, than to reply with a massive block of quoted text with most of it not relevant to the comment (and then wrestle with selecting to try to trim without breaking quote, easier from Tapatalk, very difficult from the lousy mobile web interface). Retract your dig at me and I will retract mine at you. Please.

Sent from my GT-N7105 using Tapatalk 2

**Hillbilly** · 24-03-2013, 12:07 PM

Originally Posted by tonymy01

You are lecturing me about forum etiquette, but you have done a full quote without trimming up there in the thread. I am posting from my phone, far easier to reply with no quote, than to reply with a massive block of quoted text with most of it not relevant to the comment (and then wrestle with selecting to try to trim without breaking quote, easier from Tapatalk, very difficult from the lousy mobile web interface). Retract your dig at me and I will retract mine at you. Please.
Sent from my GT-N7105 using Tapatalk 2

Wasnt lecturing or having a dig, just stating why the wrong assumption was taken. Sorry you are offended, as was I a little bit

**Transporter** · 24-03-2013, 01:25 PM

I guess no harm done.

Sent from my GT-N7000 using Tapatalk 2

**omega31** · 24-03-2013, 09:02 PM

OK, after today’s battery drama and my misspelling causing some fun and games can someone please explain why:

1. Skoda 2011 MY12 had a battery drain after 4120 upgrade.

2. SO far, Battery is ok but running the gateway 'Fix for old CAN gateways' the Volume control is now not working on the steering wheel.

Possible need some VCDS programing which I have never done or have any equipment to do it.

Should I downgrade to firmware 4020 or 38XX ? , I am just worried my battery will drain again and will need to update the gateway with the steering wheel volume not working.

What do you more experience members think ?

**tonymy01** · 24-03-2013, 10:22 PM

does any of the RNS stuff show up in the MFD? e.g Navigation, phonebook.
If not, then you may need to go into the can gateway and tick that you have the rns, or look at other gateway options.
There are certainly options for the radio/ navigation module in vcds for steering buttons, maybe you need to check all the vcds navigation options again.