Firmware updates for RNS510 units in Australia/NZ

[sr007au]

Hi Everyone.

I've got a 2011 Passat CC and have just used the information and files located in this thread to upgrade my RNS 510 to a newer SW 5238 version.
I bought a Australian V8 map on DVD from JKU on the Sunshine Coast so undated the maps while I was at it.

All seems to have gone well as now I get the radio texts with the current song etc, can now see the hidden menu for showing what software i'm running and the video in motion is also working. It took about an hour to install and a few minutes driving around for the GPS to get a fix on me.

However, I have noticed 1 item I think has changed for the worse.

When reversing - the rear view camera shows on the screen, along with the top view of the CC on the left hand side for the OPS.

The OPS is not completely transparent, there seems to be a grey fan shaped area where the orange and red lines show how close you are to an object. I'm sure before the upgrade it was totally transparent.

Can anyone confirm ? Any ideas where I can find the information to make it transparent once again as it spoils the rear view camera picture as the view is now greyed out under the fan of the OPS ?

Thanks

[kamold]

They did change the OPS view and made it more granular for newer PDC controllers.
It is more accurate as it now shows more radar increments.
You can always close the OPS view and just see the RVC and listen to the PDC beeps if you prefer.
There is no way to change the actual settings of the OPS view itself.

[sr007au]

Thanks for the reply.

I'll just have to get used to it, and as you said, minimize the OPS when the rear view camera is on if it is annoying me.

Cheers

[Mattlock]

Hi everyone,

My RNS510 in my Tig has gained a corrupted boot screen (the image is all twisted and displays in out-of-alignment horizontal bands. I'm trying to fix it so it looks correct on start-up (thinking about selling the car) but I can't get to the ISO creation site any more (seems to have been taken down).

Does anyone have a way to create the ISO so I can reload the original file?

[Hillbilly]

Hi everyone,

My RNS510 in my Tig has gained a corrupted boot screen (the image is all twisted and displays in out-of-alignment horizontal bands. I'm trying to fix it so it looks correct on start-up (thinking about selling the car) but I can't get to the ISO creation site any more (seems to have been taken down).
Does anyone have a way to create the ISO so I can reload the original file?

A quick Google revealed this


Volkswagen RNS 510 SWL Recovery CD for Gateway Error 202 or Boot Problems | my-gti.com

[Mattlock]

A quick Google revealed this


Volkswagen RNS 510 SWL Recovery CD for Gateway Error 202 or Boot Problems | my-gti.com

Interesting, thanks. I attacked the googling from a different direction rather than thinking about recovery.



Sent from my iPhone using Tapatalk

[Oztig]

I apologise upfront for a verbose post; but tried my best to be accurate & concise with the problem.



Tiguan bought new 2009 (great car) in Penrith (Ver 2 Map). First problem to show up was F3 Wyong "Black Hole" - system crashed, then after a few minutes, rebooted. Dealer told me problem was I lost a satellite at that point!!

Took it back again after next occurrance to service manager this time; Dealer returned the vehicle after having it all day, "fixed"; but nothing changed. Tried reloading the Ver 2 map myself only to get "CD/DVD ERROR"!

So in frustration just lived with the problem.

Then, bought Ver 7 Map from Dealer when it came out, thinking it was a programming problem in Ver 2 Map: only to be greeted with the same error message!

Thinking then it might be a FW problem, came across this tread after much searching (Google search) & followed Kamold's notes exactly to upgrade, which seem to work a treat (many thanks).



Tried loading Ver 7 maps again.....same error message splashed the screen!!

Decided then the DVD optical reader must be at fault - no problems reading CD's; just won't load DVD''s.

BUT THEN; if that was the case, why did the DVD work successfully with the FW upgrade?

Anyway, decided to replace the DVD; purchased online from cars-equipment.com (cz);
ORIGINAL DVD



NEW DVD



After installing the new DVD & switching the unit on, without inserting the key, the very first screen splash appeared with :

"Loading CD/DVD Please wait...."!! I hadn't put a DVD near the thing!

This was then followed with the next one "CD/DVD ERROR". I tried inserting a CD into the machine, but it was locked closed. So that just seemed a big waste of money!!

So after all this I've just put the old DVD back in - at least it "half works"; but still no maps installed.

The only thing it seems is to copy (?) the Ver 7 map onto an SD card & install it from there?

Extremely frustrating to say the least. Just hoping someone might be able to shed some light on the problem what I'm doing wrong.

ANY advise would be greatly appreciated...

[kamold]

There is a utility available to load Maps from SD card online somewhere though I've never used it.
If you are in Sydney happy to take a look at it for you some time.

Sent from my HTC 10 using Tapatalk

[Hillbilly]

I have found that you cant reinstall the same version map over itself EG 7 over 7. You can load 6 over it and then 7 but not the same one.

Was that unit new in the car or an EBay special????.


Also best to use a DVD burned as slow as possible if a copy.

[Oztig]

Many thanks Kamold; think I remember seeing it on the "Christian-jeanin" website - link from this site.

Many thanks for the advice Hillbilly - (not a Ebay job - a $3k optional accessory included when bought new!!) - thats what makes it more painful....!!