Firmware updates for RNS510 units in Australia/NZ

[Hillbilly]

thanks Hillbilly, so I don't screw this right up.. My unit is an original B version.. the part number changed when I upgraded to v3810 to 1t0035680D. will 4120 work with this without recoding?

Not sure wait for Kamold to reply He is the Guru on these

[kamold]

No recoding required for any of the firmware images here.

[Hillbilly]

Think he wanted to know which version to use in his B version as it changed from B to D and Im not game to recommend one LOL

[rickbaron]

Think he wanted to know which version to use in his B version as it changed from B to D and Im not game to recommend one LOL

Yup that's exactly right. It was an original B ver.. hoping 4120 can go into this unit.

[ptR]

Anyone here successfully ran firmware 5238? Or 5269? For AUS/NZ?

Sent from my GT-I9505 using Tapatalk

[kamold]

Yup that's exactly right. It was an original B ver.. hoping 4120 can go into this unit.

You need to check your hw_radio version. If it is 04 or below you cannot use 4120.

[kamold]

Anyone here successfully ran firmware 5238? Or 5269? For AUS/NZ?

Sent from my GT-I9505 using Tapatalk

Yes. Been running fine for about 6 months.
However it doesn't add any significant features over 4120 so there is no point for most users .
Every flash of the unit has a small risk of failure which could brick it so I've not made it widely available.
It is for dab units which are horribly expensive.
If you are really keen im me and you can have it.

[rickbaron]

You need to check your hw_radio version. If it is 04 or below you cannot use 4120.

thanks Kamold. HW Radio ver is 0004.... I guess I am stuck with v3810..

[kamold]

thanks Kamold. HW Radio ver is 0004.... I guess I am stuck with v3810..

Yeah 4120 has a chance of bricking the tuner board in those units.
You can run 4020 however.

[rickbaron]

Yeah 4120 has a chance of bricking the tuner board in those units.
You can run 4020 however.

thanks kamold will give that a go tonight then, will let you know how I go.