Auto-Polar FIS+ Advanced - Complete Guide

[Ryan_R]

DSG Oil temp should be 85 degrees.

[iamthestig]

Another thing that comes to mind after seeing the data from the FIS+ is that when you swap back to the standard trip computer, the data looks lost - just the one entry per screen. Would be great if we could get one screen that showed average and inst fuel economy plus the remaining range all together for example...

[AdamD]

Do you know what the "working" temperature of the oil for TSI engines is? i.e. what temp you need to get to before fanging it... I mean driving a little more enthusiastically?

Make sure it's at least up to 80 mate.

[tigger73]

Last of the group buy units are up for grabs - see here for details

If you own an EOS, Passat or Scirocco (or know someone who does) and are prepared to do a write-up on one of these vehicles (i.e. take a couple of photos while doing the install) please let me know as I'll do a "special deal" so that future installers in these vehicles have a guide.

[Ryan_R]

If anyone feels like taking a bunch of photos of each of the screens I could write up a user guide for them as well, save them a job.

[The_Hawk]

I relented today and put the unit back into my car (after a firmware upgrade)

I have to say the install through the cabin is just a wee bit easier (and quicker). Both the PolarFIS+ and the CANBUS box are now sitting in that little drawer so access in the future is very simple.

[Ryan_R]

Couldn't sell it?

[The_Hawk]

I didn't get any interest and it was sitting on my desk... so here we are

Will see how I got with it back in there, the short drive I have had to make sure it works and the new firmware looks a little better than the old.

[AdamD]

If anyone feels like taking a bunch of photos of each of the screens I could write up a user guide for them as well, save them a job.

A user guide would be great Ryan. I've not installed mine yet, but when I get round to it, if you've not got photos by then I'll take some for you.

[AdamD]

So I know this is the Autopolar thread, but for those who are looking for a completely integrated solution that displays data on the head unit, the upcoming ANS-810 replacement might fit the bill for some. See this post.