ANS-810 / ANS-510 (PROPER RNS-510 alternative)

[rivol]

Actually is the Golf V 2005.5 type buttons

[bazzle]

There is a hidden canbus selection menu, fogotten where, if you get to it you could try a diff setting?

[rivol]

OK Thank you, maybe Sandy knows how to access that menu. I have try changing the gateway with newer with no luck.

I have the ANS 610

[DkN]

The hidden menu is accessed by long pressing the middle of the far left of the screen in Aux-In mode. However as I mentioned, while there is a CAN-Bus selection option, it does not appear to actually do anything. From what I understand the current ANS series have CAN-Bus decoder modules that cannot be upgraded via firmware, which unfortunately makes your steering wheel button issues unlikely to be resolved by an update.

I would imagine that it's your steering controller that is sending different signals which are not interpreted by the ANS unit.

the new generation units would have a CAN-Bus decoder that can be soft-upgraded.

[chocolatemoose]

any more news on those new units

[rivol]

I would imagine that it's your steering controller that is sending different signals which are not interpreted by the ANS unit.

I tried 1K0 953 549 BK steering controller type 2 with no luck

The only way to make it work (next-previous buttons) is when I set the MFD to AUDIO and through the wiper stalk arrows up and down.

I didn't see any can-bus settings in my secret menu.

The only reason that I'm still searching for a solution to that is because my previous RCD 300 MP3 was working fine with these type of buttons.

[alecocr20]

I just updated to:

MPU: ANS510AS.M99
MCU: ans510.130112.m1.D0

FM station problem seems fixed but now I have a high beep sound when the unit is ON ( the beep was there before but much much lower)

Alejandro

I just realized that this beep noise ( is a background noise not the the key beep sound) is there when the brightness is medium
When high or off is ok

I don't know if all the units have the same issue

Alejandro

[bazzle]

I only use High. Next time I reset Ill have a look too

[DkN]

I just realized that this beep noise ( is a background noise not the the key beep sound) is there when the brightness is medium
When high or off is ok

I don't know if all the units have the same issue

Alejandro

When did you purchase the unit? I think I remember the technician mentioning that some earlier units had issues with audio feedback noise when the screen brightness is throttled.

[alecocr20]

When did you purchase the unit? I think I remember the technician mentioning that some earlier units had issues with audio feedback noise when the screen brightness is throttled.

I bought it in september last year
It's a ANS610

Thank you