Unless the aftermarket sensors are also connected to a parktronic controller then they won't integrate with the RNS to provide you a radar image on the screen. However installing the RNS will not change an existing audible parking sensor setup.
Hi guys
I have a polo fitted with after market parking sensors and thinking of getting a rns510 from JKU and install it. Has anyone done that before and worked perfectly fine? I don't need the sensors and rns510 to be intergrated, i just want them to work.
thanks
Unless the aftermarket sensors are also connected to a parktronic controller then they won't integrate with the RNS to provide you a radar image on the screen. However installing the RNS will not change an existing audible parking sensor setup.
2011 Skoda Octavia vRS TDI DSG wagon|Revo Stage 1|Race Blue|Leather|Dynamic Xenons w 6000K|9w7 BT|THA475 Amp+active sub|Whiteline ALK|RVC|
2009 R36 wagon|Biscay Blue|RVC|Tailgate|ECU and DSG tune|LED DRL/Indicators|3D colour cluster|Quad LED tail rings|Climatronics upgrade|Dynaudio retrofit|B7 RLine Flat Steering Wheel|3AA CCM|TPMS Direct|B7 Adaptive Cruise with Front Assist|Discover Media retrofit|PLA 2.0|Lane Assist|BCM retrofit|High Beam Assist|DQ500
Hello, I'm actually hoping to get the sensors to integrate with RNS. Would you mind helping out as to how to connect it to the parktronic of a polo my13.5? Cheers
You'd need to buy the genuine OPC parking sensor kit, and retro-fit it.
Aftermarket park sensors are just powered up off the reverse light, and that's pretty much it. They don't, and usually can't integrate into other systems of the car.
'07 Transporter 1.9 TDI
'01 Beetle 2.0
Bookmarks