Rays Engineering 3 piece 16 x 8

[dylan8]

Link
Rays Engineering 3 piece 16 x 8

[GoLfMan]

wrong offset for adaptors unfortunately (on a Polo at least!) unless you wanted a bit of poke

[dylan8]

wrong offset for adaptors unfortunately (on a Polo at least!) unless you wanted a bit of poke

hmmm i noticed that later, was a bit excited by all the cool wheels i was finding

[Lorenz]

Stunning wheels and rare as fark, but yeah shame about the offset

[Jarred]

you'd need double up hubs to run them. or plug and drill the wheels!

[GoLfMan]

no centre cap man... plugging and drilling would be an absolute disgrace!

[Lorenz]

Could just fit these up to a VR6 with 15mm 5x100 - 5x114.3 adapters and ~ -2 deg camber up front with pulled guards

[Jarred]

no centre cap man... plugging and drilling would be an absolute disgrace!

those bolt seats look pretty big, i reckon you could fit 5x100 on there without noticing too much, especially since the slither of plugs would be hidden all the way down at the bottom of the bolt hole.