Wreck to Race.

[AusScare]

That looks like a very fast track, not many slow corners? Is it good/better to drive on than others?

[Peter Jones]

It's a fantastic track, one of the best in Australia I'm told.

Very fast and open.

[SMOK3Y]

Here's round 2 with some new overlays. Number between the clocks is which gear I'm in. Bar graph is wired to the brake light.

awsome mate

i will be doing a project car myself in about a yrs time not a VW but a Westfield (aka caterham 7 copy) its funny the one bit im looking forward to is playing with the motor & all especially as i will be running Webbers or Dellorto carbs. i really miss this aspect of modern day
motoring.

[Peter Jones]

Had the discs machined this weekend and fitted up some new EBC pads.

The discs were getting a bit groovy as I'd run out of pads at Winton.

[Peter Jones]

Next thing to fix is the extractors (again!) They broke through again at Phillip Island, I've ordered another set from Straight Line.

I'm thinking I'll weld a flang to the outlet to make servicing easier and them get them ceramic coated.

[Volksee77]

looking good Pete, what calipers are you running?

[kaanage]

It's a fantastic track, one of the best in Australia I'm told.

Very fast and open.

I'd say only Barbagallo at Wanneroo, WA would have a chance of being as good as PI. None of the remaining tracks in Australia flow and let you build speed the way that these 2 do.
Oran Park was fabulous but has closed due to suburban encroachment.
Eastern Creek is very good through to turn 5 but a hold out farmer forced the back section of the track to close back on itself rather than opening up as was originally intended

sorry for the OP

And to add to Volksee77's question, what rotors are those?

[Peter Jones]

looking good Pete, what calipers are you running?

The current setup is 16v Scirocco calipers over EBC 256mm vented, slotted and dimpled discs.

The calipers are pretty exotic, 256mm units the bolt sraight up to MK1.

[Water Boy]

Trying to see a pic of your steering wheel but couldnt. Is it here some where?

[Peter Jones]

It's in another thread.