Hey guys, I'm building a Mk1 '77 4 door with a KR 1.9 16v on 45 DCOE's.

I started on this car about 2.5 years ago and came to a halt last year due to other commitments and lack of interest. But thanks to my mate buying a Mk1 escort and doing super sprints etc, it's got me all revved up and enthused again to finish it to do the same stuff.

All the progress up untill this point can be found on..

http://www.vwfixx.com/forums/index.php?showtopic=34054

That was the website i used to spend a lot of time on before i found out there was actually people in australia that had more that two brain cells and wanted something better than a japanese tupperwear car.

So here's the go, all the exterior is now finished, i recently got some new bumpers and some very second hand side trims off Brenton (DVR68U).

I cleaned the side trims up and painted them satin black, they came up excellent.

The engine is completely disassembled at the moment and the head is away being ported and flowed and having TT oversized valves, TT springs and Titanium retainers fitted. I've knife edged the crank (Tuning and performance section) and the block is currently being cleaned up and checked over ready to be bored etc once i get some pistons.

Also, i'm open to any suggestions from anyone about anything on past experience etc..

Anybody know a good roll cage builder in NSW? Someone who has done golfs before would be tops!