Another Wreck, another Race Car.....

**Peter Jones** · 11-09-2011, 08:18 PM

Fitted up the sway bar, had to fettle with the bolts on the centre stabiliser bracket to make it all fit nicely.

Mounts on.

**Preen59** · 11-09-2011, 08:50 PM

Looks the goods, Pete! Glad to see the SCCH gear worked out nicely.

The red is a bit unusual.. But hey, you're the man doing the work and paying the bills! haha.

**Jarred** · 11-09-2011, 08:56 PM

Looking good Pete!

**kaanage** · 12-09-2011, 07:31 AM

Did you consider stiffening up the beam itself rather than adding the rear anti-roll bar or do you want to be able to remove the bar for running in the rain?

**dubmc** · 12-09-2011, 09:15 AM

nice work pete, keep it coming!

**GoLfMan** · 12-09-2011, 02:21 PM

thats awesome. Were you happy with the price and finish on the wheels you had blasted Pete?? Can you PM price too

**Peter Jones** · 12-09-2011, 03:02 PM

Sandblasting was $290 all up for 10 wheels, 2 rear beams and 1 antique weather vane.

The finish is quite coarse on the wheels but paint should smooth it out.

Powder coating was $190 for two beams, about 10 small assorted brackets and 1 antique weather vane.

Alliance Industries - Abrasive Blasting - Bayswater, VIC - Yellow Pages®

Just Powder Coating

They're across the road from each other and will happily work together.

**GoLfMan** · 12-09-2011, 05:30 PM

went and checked them out today. Turns out the powdercoating is too thick on the Porsche wheels for them to straight sandblast (they could but the finish would be quite coarse). So industrial paint stripper it is

**Tim** · 12-09-2011, 05:31 PM

Originally Posted by GoLfMan

went and checked them out today. Turns out the powdercoating is too thick on the Porsche wheels for them to straight sandblast (they could but the finish would be quite coarse). So industrial paint stripper it is

If you buy another set of porsche wheels im going to slap you! The last ones were a pain in the butt as well!