Super Moderator
VWwA Super Moderator
SureOriginally Posted by zedub
Volkswagen Fan
Bloting it to the seat is an interesting concept, i wouldnt have thought of it.
did you put a small plate on the other side of the plastic to make things a bit stronger?
I will now have to look at mounting it to the seat, otherwise i will tec screw it to the floor.
Thanks for the pics
~~~~____~~~~~~~~~_\_____
~~~ /_|__\__~~~~~~ / //__|__\___
____( )|__( ) ]_MKI ___[(' )__|___( ) ]_MKIV__
Super Moderator
VWwA Super Moderator
I used one original hole, but used a longer screw. And I used a clip from aftermarket speaker for the 2nd screw to tap into.
Volkswagen Fan
good idea, don't think it'll work with my seats tho.. oh well..
thanks for the pic tho
Volkswagen Fan
Guys, I really I mean REALLY would not present an extinguisher in a plastic bracket for scruitineering. Metal bracket CAMS friendly extinguishers are available from Bunnings for $30.
C
It's been a while...
Super Moderator
VWwA Super Moderator
Did McCosker really want a CAMS approved install ?
I know the thread went into all sorts of detail about CAMS regulations and crap about how to test an extinguisher but at the end of the day for a cheap basic install for a daily driver / occasional track car this does it really matter ?
Plastic mount setup cost less than $20
Volkswagen Fan
Yeah, it is just for a ocassional track car, for now. i still want to buy the right gear once, so i do have one with a metal bracket.
Thanks for all the assistance eveyone.
Now i have eveything sorted, all thats left is to get to the track on sunday.
~~~~____~~~~~~~~~_\_____
~~~ /_|__\__~~~~~~ / //__|__\___
____( )|__( ) ]_MKI ___[(' )__|___( ) ]_MKIV__
Posting Permissions
Reply With Quote
Bookmarks