Getting Bitza back on the road

**ORD10** · 07-05-2017, 04:00 PM

Originally Posted by Water Boy

Ok if you swap the brakes from a Cupra you also need to upgrade to 15" wheels. Not all 15" wheels clear the 280mm Cupra brakes.

Yesss suspension is a straight swap.

Thanks was expecting to go to at least 15" wheels Do you happen to know what offset standard 98 Cupra wheels are

Sent from my iPhone using Tapatalk

**Bora Sport** · 07-05-2017, 09:34 PM

Where on the Sunny Coast are you? I have a complete set front and rear brakes off a Cupra.

**ORD10** · 10-05-2017, 05:53 PM

Hi. Landsborough. What condition and price

Sent from my iPhone using Tapatalk

**Bora Sport** · 11-05-2017, 03:22 PM

The rotors are nearly new. I'm pretty sure the pads are almost new too. They were only on the car for a short time before the car was in an accident and written off. The front calipers have been painted red and are a bit dirty but would clean up fine. They have been off the car for a few years but should be good. If I recall I tool them off complete with the carrier etc. I can check them and mms you photos on Saturday. The rears are in pretty good condition and they are complete with hub, abs ring etc. If you are keen for a short drive you could view them all in Nambour on Saturday. Not sure what they are worth but I have no need for them now. If you are keen PM me a phone number and we can arrange a time.