Results 1 to 5 of 5

Thread: Cordoba varying idle speed

  1. #1
    Join Date
    Mar 2008
    Location
    Ferntree Gully Vic
    Posts
    43

    Cordoba varying idle speed

    Bron's Cordoba has just developed a varying idle speed problem. It's a bit random and varies between 900 and 2000 RPM. The rubber isolator under the throttle body is OK. I really need to fix this as she has bought a Bora and wants to sell the Cordoba. Anyone interested in a very tidy '95 red manual with a RWC and 12 mths reg in Melbourne?
    Hugh.

  2. #2
    Join Date
    Aug 2007
    Location
    Dont poke and hope, scan, smoke and scope
    Posts
    4,423
    Users Country Flag
    Check around for any split hoses. Could be the potentiometer for throttle position. You can have it scanned, potentiometer throws a code when its ill.
    Good luck
    Jmac
    Alba European
    Service, Diagnostics and repairs. Mobile Diag available on request
    Audi/VW/Porsche Factory trained tech 25+ yrs exp
    For people who value experience call 0423965341

  3. #3
    Join Date
    May 2005
    Location
    Camden, Sydney
    Posts
    7,377
    Users Country Flag
    Unplug each of the connectors to the single point unit in turn whilst the car is running. If it doesnt change the running with one of the parts unplugged there is a problem with the singlepoint unit. You can buy each of the parts of the unit individually, but they are very expensive. A secondhand single pint unit will be a cheaper option.

    Also would be worth checking the dissy is done up tight, randomly variable timing will do the same thing
    Camden GTI Performance. VW / AUDI Specialists
    All Mechanical Work, Log book Servicing, New and used Parts and Imports
    19-20/6 Badgally Road, Campbelltown, 2560
    02 4627 3072 or 0423 051737 www.camdengti.com

  4. #4
    Join Date
    Mar 2008
    Location
    Ferntree Gully Vic
    Posts
    43
    Thread Starter

    Varying idle speed

    Thanks Guys,
    I'll have a look over the weekend.
    Hugh.

  5. #5
    Join Date
    Mar 2008
    Location
    Ferntree Gully Vic
    Posts
    43
    Thread Starter

    By the time I got to it it had settled down and is no longer a problem. I had previously had the cam belt off and dropped a tooth on the auxilliary sprocket and had to reset the ignition timing. Perhaps it took a bit of running after the ignition timing was altered to sort itself out.
    Hugh.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |