Scirocco r mods

[Rev 555]

What kit is that mate? Unusual size but big!

[RoccoR]

I bought these of Dean (owner) @ Volkspower after he had done about 3000kms on them. They pull up incredibly!!

[Andych]

Yeah I already have the BBK cos I had them on my GTI Mk6 and now putting them on my scirocco. If they fit on the GTI with 18" rims I'm almost certain that the 19" talladegas will swallow them quite easily. The rotors are 375mm and I know they'll fit also.

It isnt diameter you need to be worried about but spoke clearance...it is all dependent on the wheel.
By the way.... according to the kit part number...it would appear the discs are 355mm which is a more common size..
Good luck with it...Pics when finished would be good.

[RoccoR]

Yeah you're right they are 355mm not 375mm. Not sure where I got that from. I will definitely put up some pics when completed. 😃

[RoccOwner]

Yeah you're right they are 355mm not 375mm. Not sure where I got that from. I will definitely put up some pics when completed. 😃

Looking forward to feeling the stopping power of your new brakes !

[Rev 555]

This is my BBK from AP racing. Similar to the ones used on the Scirocco Cup cars.

The 2 piece rotor weigh only 6.9 kg! (OEM 12kg)



The 6 piston monoblock calipers, custom bracket and pad weighs 3.2kg (OEM 9kg)



Total saving of 10kg of unsprung weight per corner!

[gtimonkey]

Those AP racing brakes totally look the goods.

40kg saving is amazing

[Andych]

This is my BBK from AP racing. Similar to the ones used on the Scirocco Cup cars.

The 2 piece rotor weigh only 6.9 kg! (OEM 12kg)



The 6 piston monoblock calipers, custom bracket and pad weighs 3.2kg (OEM 9kg)



Total saving of 10kg of unsprung weight per corner!

I hope you are going with ceramic pads too...no more brake dust...then...

[RoccoR]

These look awesome!! AP Racing are definitely proper track brakes.
How much did the kit set u back including rotors.

[RoccoR]

First time I got a chance to take some pics of my recently plasti dipped Rims!! A week old now.