vr6 pcv valve

[A Man Eating Duck]

You can get the PCV valve separately from the the dealer if you use the one for the Sharan. Only thing is I'm not 100% sure if the PCV valve is exactly same as the mk3 golf VR6. It's still expensive, $137 NZD, but better than $300+ for the PCV and intake.

[vonbrauer]

What were the measurement/specs for the oil breather & how did you block off the other lines?

[Smeeeb]

Holy thread revival Batman!

[b0k1]

i did the breather fix and I think it was 20mm in diameter. but I got rid of it quick because the fumes would go straight through my vents and kill me inside everytime I stopped at the lights.

[DBT_98vr6]

So I'm in the same situation now. Quite frustrating re having to buy the whole intake section. Barloworld said they'd do it for $260 but that's still a lot for parts I don't need. (See pic below). Has anyone done a DIY oil catch can? Is that a logical solution to the problem or just as expensive?

[HaydEn]

Rubber hose for $2.00


"I only post on Facebook if I know i am going to get likes" - M

[anthony--t]

I currently have some hose straight from the crankcase to intake just means oil residue in the throttle body like mentioned earlier. Looking into doing a catch can soon. Super easy, just gotta find a nice place to mount it.