VR6 Coilpacks

[syncro]

Well, if I were you, I'd go to the Hardware section in your local K-Mart and see if they have JB Weld.

Not sure if JB weld has very good insulation properties. Araldite may be better.

[syncro]

As for the VR6 imports, maybe it was 350

i reckon the vr6's are in the high hundreds - if i remember the colour concepts were in the order of 200 - so the vr6 from 94-97? must be a few times that no.

Colour Concepts were only in the dozens, maybe 50 at most.

There are a few years that they did not import VR6s as they had them left over from the previous years. Some of the compliance plates were fitted on cars 3 years old. ('94 car/ '97 compliance plate)

[kai_h]

I was a bit worried, as JB Weld is a metal filled epoxy, that it might conduct electricity, but according to their FAQ on jbweld.net, it is an insulator. I wasn't too sure about the high-temperature properties of Araldite, and wanted something that was definitely rated for high temperatures.

[DVR68U]

nice write up mate
cheers brenton