The Vento

[Surfpig]

How low is the car? Front of the sills/pinch welds and subframe?

the sills are 40mm, the lowest point on the car is 30mm.


thanks for all the comments guys, im really stoked with how it turned out for a first fitment. theres a bit of tweaking to do but it shouldnt take long

[Surfpig]

The rear needs a little camber and it'd look the tits.

whats the best way to adjust rear camber? fronts piss easy just hoping the rear is as easy

[Smeeeb]

whats the best way to adjust rear camber? fronts piss easy just hoping the rear is as easy

Unless you have camber adjustments on your coils you'll have to buy some piss easy to get. I've seen a couple floating around. The front camber is nice matching that would look tops.

[anthony--t]

whats the best way to adjust rear camber? fronts piss easy just hoping the rear is as easy

Pretty sure you need camber shims. However some people ghetto it with washers.

[Surfpig]

[Surfpig]

SPC -0.5 Degree Rear Camber or Toe Shim - Mk1/Mk2/Mk3 by SPC | Euro Sport Accessories

this look good???

[Smeeeb]

Go more aggressive than that do like 5 or so degrees. Drop the rear and little more get some nice poke.

[shooitt]

Pretty sure you need camber shims. However some people ghetto it with washers.

I certainly wouldn't use washers >_>
<_<

[HaydEn]

Go more aggressive than that do like 5 or so degrees. Drop the rear and little more get some nice poke.

That 2degrees...

[Smeeeb]

That 2degrees...

Two would look sweet then. I have nothing to compare them to in my head.