The Vento

Quote:

---

Originally Posted by Jarred

How low is the car? Front of the sills/pinch welds and subframe?

---

the sills are 40mm, the lowest point on the car is 30mm.


thanks for all the comments guys, im really stoked with how it turned out for a first fitment. theres a bit of tweaking to do but it shouldnt take long

Quote:

---

Originally Posted by Smeeeb

The rear needs a little camber and it'd look the tits.

---

whats the best way to adjust rear camber? fronts piss easy just hoping the rear is as easy

Quote:

---

Originally Posted by Surfpig

whats the best way to adjust rear camber? fronts piss easy just hoping the rear is as easy

---

Unless you have camber adjustments on your coils you'll have to buy some piss easy to get. I've seen a couple floating around. The front camber is nice matching that would look tops.

Quote:

---

Originally Posted by Surfpig

whats the best way to adjust rear camber? fronts piss easy just hoping the rear is as easy

---

Pretty sure you need camber shims. However some people ghetto it with washers.

http://www.vwwatercooled.com.au/foru...24244857-1.jpg

SPC -0.5 Degree Rear Camber or Toe Shim - Mk1/Mk2/Mk3 by SPC | Euro Sport Accessories

this look good???

Go more aggressive than that do like 5 or so degrees. Drop the rear and little more get some nice poke.

Quote:

---

Originally Posted by anthony--t

Pretty sure you need camber shims. However some people ghetto it with washers.

---

I certainly wouldn't use washers >_>
<_<

Quote:

---

Originally Posted by Smeeeb

Go more aggressive than that do like 5 or so degrees. Drop the rear and little more get some nice poke.

---

http://www.vwwatercooled.com.au/foru...hymynanu-1.jpg

That 2degrees...

Quote:

---

Originally Posted by HaydEn

http://www.vwwatercooled.com.au/foru...hymynanu-1.jpg

That 2degrees...

---

Two would look sweet then. I have nothing to compare them to in my head.