?Torque settings for 2.0L motor?

[Peter Jones]

Could someone with a workshop manual look up the following settings for me please?

Crank sprocket bolt (The big 'un in the middle)
Crank pulley bolts
Pressure plate to crank bolts
flywheel to pressure plate

Most of these are stretch bolts (New), my MK1 / Mk 2 manuals don't cover them and I'm not having much luck with Google.

If anyone could explain the pressure plate to crank assembly that would be great too. Is there a washer in between the two, and is there a shim under the bolt heads? I'm putting a 210mm 16v pressure plate onto a formally auto 2E motor to go in a MK 1, hence the confusion.

Any help much appreciated,

Pete

[h100vw]

I have a manual for the 9A Passat engine here.

Crank Pulley bolt is 44ftlb plus 1/4 turn
Flywheel to crankshaft 44ftlb plus 1/4 turn, the 6 17mm ones IIRC
clutch pressure plate to crank 15ftlb, the 8 point 9mm ones
fan belt pulley is 15ft lb again

My Bentley shows a shim and washer with the auto box but neither when using a manual box.


HTH

[Peter Jones]

Fantastic, Thanks muchly.

Pete

[h100vw]

Anytime.

Gavin