The Stu's Bagged VR6 Cab

**Mrk_Mickey** · 04-04-2009, 03:20 PM

Originally Posted by V-AC728

is that on hottuning coilovers? I'm thinking of buying some so some feedback would be awesome once youve driven a while on them. looks like that rear tyre is tucking a bit thats pretty low. do you rub at that height at all?

I can vouch for him and say he's running hottuning and I can also say he won't be rubbing

My rears are that low (or lower? dunno

) with wider wheels and I have sweet sweet silence no matter how many people I carry

I dunno how low I am compared to Stu at the front but when I first lowered my car it was even lower than that and all I heard was bumps from my subframe over humps...no scrubbing

**Spyda** · 04-04-2009, 04:47 PM

Needs to be lower man.

**thestu** · 04-04-2009, 05:26 PM

Originally Posted by Spyda

Needs to be lower man.

i still need to roady it!!! lol and the bora sports will just be tucking at this high. so its perfect

its soooo much better to drive lol!

**thestu** · 04-04-2009, 05:27 PM

Originally Posted by Mrk_Mickey

Hooray for little Stuey!!

Now get ready for driveshaft issues, all sorts of bushings replacements and big unbendable metal being bent.

what do you mean mickey??

**Mrk_Mickey** · 04-04-2009, 05:35 PM

Originally Posted by thestu

what do you mean mickey??

being low just gives you trouble 24/7. Just be prepared for constant annoyance

**Lorenz** · 04-04-2009, 05:39 PM

Looks good stu

Since mines been lowered, Ive have to replace wheel bearings, control arm bushes, sway bar bushes and just done ball joints.... gets expensive

**thestu** · 04-04-2009, 05:42 PM

Originally Posted by Lorenz

Looks good stu

Since mines been lowered, Ive have to replace wheel bearings, control arm bushes, sway bar bushes and just done ball joints.... gets expensive

bugger!!!! Well hopefully not too much will screw up...considering a do about 900km a week

you saw how low the front was before and i have done 5000km like that...so should be sweet and when stuff breaks i guess i will have to fix it lol

**Mrk_Mickey** · 04-04-2009, 06:10 PM

Originally Posted by Lorenz

Looks good stu

Since mines been lowered, Ive have to replace wheel bearings, control arm bushes, sway bar bushes and just done ball joints.... gets expensive

I've nearly completed that list, yay!! lol. Sway bushes/ball joints is all I haven't done. And, I've been told tie-rods/tie-rod ends are a good idea too, just so the stronger suspension can be handled with wheel alignments and stuff.