replacing window reg - need advice

**b0k1** · 09-06-2011, 10:50 PM

So my window regulator finally gave in and I'm looking around for a new one. I read somewhere that aftermarket regulators won't work with the oem motors. Will any of the following work with my window motor? I've got a 1994 golf with power windows.

VW GOLF JETTA WINDOW REGULATOR FRONT RIGHT 1993-1999 | eBay

VW Jetta Golf Window Regulator Front Right 93 94 95 96 | eBay

VOLKSWAGEN JETTA GOLF FRONT RIGHT WINDOW REGULATOR | eBay

Thanks.

**mattross** · 10-06-2011, 07:51 AM

I got an aftermarket one (non OEM) and it worked perfectly. Actually, the original reg could have been repaired (as they usually only do). The plastic bits break, if you can fix them up you should be sweet. Otherwise, have some gaffer tape and a styrofoam box handy so you can chock up and tape the window shut until you sort it out. Also, try not to rub/bang the whole assembly aginst ya window if it has tinting.
Those ones in the links look like the one i got, the motor mounting torx screws need to fit it....(MK3 GL2.0L AGG)
CAR :: 04122009.jpg picture by thepsychopomp - Photobucket
CAR :: 13112009001.jpg picture by thepsychopomp - Photobucket

**b0k1** · 11-06-2011, 01:50 AM

Thanks for the reply, I'm gonna order one from ebay.

moogeybup · 18-06-2011, 06:46 PM

Hi - used chicken wire to replace the broken plastic bit and it works a treat.
Not kidding !

**karmen** · 23-06-2011, 08:04 PM

any pics of the chook wire
what are the specs of the wire
chinese or aussie (wire not chooks??)

moogeybup · 24-06-2011, 08:48 PM

I knew I should of taken photos - the other two windows are still on original non chook wire gear so they're likely gonners soon - when I do them I will put some shots up here. There is a small white hard plastic sleeve onto which the winding mechanism sits - this plastic bit was broken so we tied the plastic bit onto the mechanism with the wire - option was to spend a couple hundred bucks - standard chook wire (not used - although there was a bit of a smell......