Dubber
so im having some issues with new keys i got cut for my MK3.
i picked up some blank key blades off ebay and got them cut, they open the doors work in the ignition (temporarily) however the immobiliser kicks in and the engine dies after a couple of seconds.
anyone know how to resolve this issue? bypass the immobiliser? im a noob so please be gentle.
Last edited by VR6ING; 03-10-2011 at 10:41 AM.
Volkswagen Enthusiast
does your old key have a chip in it for the immobiliser ? you may need to swap it over if it has one .
Polo GTI
T-Roc R
Tiguan R
Tiguan 162 Allspace Wolfsburg
Dubber
it probably does. i purchased a 'flip blade' key .. there is a load of space in it to put a chip..
the original key must be coded but i only have 1 key.. any way to duplicate them?
Volkswagen Enthusiast
That i can't tell you , my VR doesn't have the chip so i never had this issue .
Someone on here should be able to point you in the right direction or maybe have a crack on google search .
Polo GTI
T-Roc R
Tiguan R
Tiguan 162 Allspace Wolfsburg
Dubber
i did a bit of a google search and have decided to bite the bullet and take it to a mobile electronics place and get them to install a keyless entry for me... they can install it for around $200 bucks. saves me the headache.
Last edited by VR6ING; 03-10-2011 at 11:33 AM.
Volkswagen Enthusiast
take it out of the key and place it somewhere inside the column near the barrel where it can be read ?
save your $200
Polo GTI
T-Roc R
Tiguan R
Tiguan 162 Allspace Wolfsburg
Posting Permissions
Reply With Quote
Bookmarks