My New VR6 *Little Update Thread*

[HaydEn]

So chucked the cx's in today. Bit disappointed. Stiff as so I am happy on that front.

But they are lacking in the lows department.


"I only post on Facebook if I know i am going to get likes" - M

[HaydEn]

Picture of Mac lows.


"I only post on Facebook if I know i am going to get likes" - M

[HaydEn]

"I only post on Facebook if I know i am going to get likes" - M

[anthony--t]

[HaydEn]

Funny ****er.


"I only post on Facebook if I know i am going to get likes" - M

[Surfpig]

Take the helpers out to help you get down

[HaydEn]

They don't have helpers:p


"I only post on Facebook if I know i am going to get likes" - M

[HaydEn]

Today was the day my expanding parts of crap gets put into this thing. Started off great getting a 28mm neuspeed swaybar in within 4 minutes of pulling into the garage. Next up was cams. Got through this alright. One of the cam sprocket bolts was seized up real good. Lucky had a mate with a workshop so heated it up long with an oxy and after a lot of cracking with a rattle gun it came off. Dash to buy new bolts. Got back put it all together. Snapped one of the studs when tightening up the bearing caps. Wasn't even near the torqued setting.

So disappointed about that; hopefully get that sorted tomorrow, tensioner back on, real 2.9 manifold on along with the A/c and P/S delete kit and get to the track next Wednesday.


"I only post on Facebook if I know i am going to get likes" - M

[PoDgE]

Are you selling your modified 2.8 manifold or old coilovers?

[KKK VR6]

Dyno it before you go to the track, it'll go better !
Plus you'll also find out if anything isn't quite working properly.