Mounts, bushes, control arms!

[vr6mike]

Just been told by Midas (not that I take their word as truth) as they were doing a wheel allignment, that my engine mounts are very worn (nothing I didn't expect), the bushes are gone as are the lower control arms. Is there much potential for long term damage or what are the possible ramifications given the above, cause I can't really see the value in forking out on labour to have it sorted in the near future. All wisdom greatly appreciated!
Cheers,
Mike

[MattyT]

Well if your engine mounts snap you'll loose power and possibly damage the engine.

Worn bushes will lead to spongy ride and poor handling.

Lower control arms don't wear out, they break. If one brakes you'll know about it when your car becomes completely unsteerable.

I'd get a second opinion from a specialist suspension place (where are you? update your details) you will be able to give honest advice.

[vr6mike]

Yeah i'd say the control arms are just worn, I'm in kensington near Randwick. Only Just found out so will definitely suss it out a bit more. Cheers for the advice Matt

[Tim]

control arm bushes wear. If they have never been replaced on your car they will probly be overdue. Upgrade to R32 ones!

[rayray086]

If you're planning to replace all the bushes and bearings, it might be worth your while to buy them from America, like from www.germanautoparts.com. We've done a few group buys from them before and their service is always fantastic. Coupled with shipping, the costs end up being cheaper than buying locally. You also have the option of going for uprated items rather than standard and they usually just cost an extra $5USD.

Just my $0.02.

[DubSteve]

Yep thats right I just bought a set of new control arm bushes from there will fit them soon once I get a service done