MK3 Random Thread

[Mk3 AAA]

Most Euro countries drive on the right, UK, Japan, Hong Kong, SA, NZ, Australia (and a few others) are the lefties. Just do your homework to see if they're easy to change over is all.

[xpeesx]

Attn; Wheel Whores, Question regarding fitment, as I am a wheel noob. 15x7 et42, How would they sit on my mk3?

[drucejnr]

Depends on the back spacing but I reckon a tad sunk, like the stock steels


Sent from my oven mitt fighting Blorgons.

[xpeesx]

Depends on the back spacing but I reckon a tad sunk, like the stock steels


Sent from my oven mitt fighting Blorgons.

Thanks man. So definitely a spacer job for tighter fitment?

[drucejnr]

My bad, back spacing doesn't really matter. Et20/15 is the "flush" spot for us.
I'm on 16x8+17 all round and I've only got like 3mm of poke at the rear, so yeah, hit up some spacers.


Sent from an Asian sweatshop.

[xpeesx]

My bad, back spacing doesn't really matter. Et20/15 is the "flush" spot for us.
I'm on 16x8+17 all round and I've only got like 3mm of poke at the rear, so yeah, hit up some spacers.


Sent from an Asian sweatshop.

I'm running 15x8 +25 now and the front fit flush and rears are a a little in.

[Water Boy]

Attn; Wheel Whores, Question regarding fitment, as I am a wheel noob. 15x7 et42, How would they sit on my mk3?

15x7 et45 will poke less than your current set up! Lower the et number further the guard sits away from the strut. (Out the guard more)

[dylan8]

Attn; Wheel Whores, Question regarding fitment, as I am a wheel noob. 15x7 et42, How would they sit on my mk3?

I'm running 15x8 +25 now and the front fit flush and rears are a a little in.

8et25 current
7et42, will poke 30mm less, have 4mm less clearance to the strut.

Mk3 vr is 6.5et43 from memory, guessing 4stud mk3 is like 6et38ish. if that gives you some ideas

[drucejnr]

guessing 4stud mk3 is like 6et38ish. if that gives you some ideas

6 et45...

[xpeesx]

15x7 et45 will poke less than your current set up! Lower the et number further the guard sits away from the strut. (Out the guard more)

8et25 current
7et42, will poke 30mm less, have 4mm less clearance to the strut.

Mk3 vr is 6.5et43 from memory, guessing 4stud mk3 is like 6et38ish. if that gives you some ideas

Thanks for the help guys. Think I might pass them up. Keep
Looking for something else.