the front brakes wont fit on the rear no.
Clearance is dependant on the offset of the rims. The stock rims on the later model VRs are the same 15" BBS rims as the earlier models. So yes. 15s fit provided the design of the rim is ok
Quick qu.
If I went for the 288mm front conversion from later model VR's, can i put the 280's i have on the back? Also, is there clearance problems with 15s?
Research and planning. Research and planning. Research and planning.
the front brakes wont fit on the rear no.
Clearance is dependant on the offset of the rims. The stock rims on the later model VRs are the same 15" BBS rims as the earlier models. So yes. 15s fit provided the design of the rim is ok
Different design for fitment.
The rear discs have the wheel bearings in them. Only on a syncro do you have a similar set up to the front, as you have a driveshaft going through the middle of the disc.
Gavin
Oh sheeeet. Of course. Rather silly of me. Cheers.
Have you got the brakes lined up? The 228mm ones from my A3 are still available. That's used discs still serviceable, calipers, brackets and some used but not worn out pads.
Gavin
Typo there gavin? If this is for the street there really isnt any point in upgrading the rears as u dont want the rears to lockup by having a too large calipers/disc.
Nah i thought u were talking about the front disc size but u were talking about the rears, nvm!
Bookmarks