KW Coilovers

[BL33SU]

my mate has a 2l red mk3 and has v2's. but they dont go low enuf so how many coils would he need to cut to make it another inch lower? gotta have some tuckage in the rears

[FknDubbin]

If your mate cuts coils on V2's ill drive up to Sydney and **** in is ear. If they dont go low enough, remove the rear spring perch.

[DUBING]

you need 2 do what it take 2 go lowww! dooooo itttttt!

[BL33SU]

you need 2 do what it take 2 go lowww! dooooo itttttt!

true ey!! get d grinders out!

i recon MK3VR6 should do it too low rida

[MattyT]

Dont you dare desecrate a set of V2s!!!!!

[vwthunder]

I have V2's

My car was really low when they were put in, the fronts were tucked and I couldnt turn, so had to lift it.
I still have problems with the fronts rubbing even with 1 degree negative camber

I dont know who says they dont go low enough, I can wind it down heaps

[rayray086]

Sell the V2's for good money and buy a cheap set of FK's or Weitecs. They go lowwww.

[DubSteve]

i recon MK3VR6 should do it too low rida

I think your nuts, I'd like to poo in your muffler before I did any of that! If you can't get low on a set of V2s you have done something wrong!

[BL33SU]

your low isnt his low LOL.. we wanna see some tucking = covering half the rim

[DubSteve]

your low isnt his low LOL.. we wanna see some tucking = covering half the rim

I can go about another inch further down but can't cause of the width of the wheels! Sell the V2s and go and by airbags if he wants to do that! BTW there is a minimum distance that he is suppose to have for the coilovers, from the centre of the wheel to the top of the arch! If you don't do that you can seriously hamper the KWs!