Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Front door lock

  1. #1
    Join Date
    Apr 2007
    Location
    Sydney
    Posts
    918

    Front door lock

    Is your front door lock freely spining and will not lock ? Most likely it is the hook on the Connecting rod is broken.

    It was a breeze to change. I got my Heavy Duty lock set from Tooleys for ~$80. It was a bit pricey as it is a modified heavy duty verion of the OEM lock set.

    DIY time ~ 1 hr.

    Disassemble door handle from door, use allen key. ( Note no need to remove door card nor window regulator, THANK rayray086)

    Firstly, the locking mechinism on the lock excentric must be transplanted, this can easly done with a long nose pliers.


    Transplanting Spring from OLD

    To New


    Lubed up. Note: DO NOT USE WD-40!!!! Lock mechanism will violently eject when pulling key out. pain in the azz to line inorder again. Use Vaseline instead !!!!!

    Lube up key with vaseline and insert into key hole a few times.


    Assemble lock as per picture. (Thanx vortex)



    Ghetto touch up.


    Assemble into car.

  2. #2
    Join Date
    Dec 2007
    Location
    Ermington, Sydney
    Posts
    4,421
    Vaseline looks disgusting, but good work Louis!
    Mrk Detailing, premium automotive detailing. Paint correction/protection specialist. PM me

  3. #3
    Join Date
    May 2005
    Location
    Camden, Sydney
    Posts
    7,377
    Users Country Flag
    The thing you have labelled as the lock eccentric is in fact the barrel.

    The lock eccentric, or connectiing rod is no 15 on that diagram. That is the bit that usually breaks and can be replaced on its own.

    Otherwise nice writeup.
    Camden GTI Performance. VW / AUDI Specialists
    All Mechanical Work, Log book Servicing, New and used Parts and Imports
    19-20/6 Badgally Road, Campbelltown, 2560
    02 4627 3072 or 0423 051737 www.camdengti.com

  4. #4
    Join Date
    Dec 2006
    Location
    Kilsyth, VIC
    Posts
    6,304
    Users Country Flag
    Quote Originally Posted by Golf Loon View Post
    That is the bit that usually breaks and can be replaced on its own.
    In about 2 minutes with a Seat part which is thicker and stronger... thanks Loon


    If it has an engine or heartbeat it's going to cost you. | Refer a Friend - AussieBroadband $50 Credit

  5. #5
    Join Date
    Oct 2006
    Location
    Sydney
    Posts
    1,440
    Any tricks to remove the door handle itself louis? Specifically the metal tab part which hooks onto the plastic door handle?

  6. #6
    Join Date
    Aug 2007
    Location
    Dont poke and hope, scan, smoke and scope
    Posts
    4,423
    Users Country Flag
    They paddle eccentric can only be bought as bigger, thicker one from VW, the old type was superceded mate. FUnny thing i found with them is that people force the lock round against its will. Really you only need to give the lock a quick flick as the lock has a microswitch. The microswitch only needs a slight tap to trigger. If you are ever stuck you can put the passenger one on to get you out of trouble.
    Cheers
    JMAc
    Alba European
    Service, Diagnostics and repairs. Mobile Diag available on request
    Audi/VW/Porsche Factory trained tech 25+ yrs exp
    For people who value experience call 0423965341

  7. #7
    Join Date
    Dec 2006
    Location
    Kilsyth, VIC
    Posts
    6,304
    Users Country Flag
    Quote Originally Posted by Jmac View Post
    They paddle eccentric can only be bought as bigger, thicker one from VW, the old type was superceded mate. FUnny thing i found with them is that people force the lock round against its will. Really you only need to give the lock a quick flick as the lock has a microswitch. The microswitch only needs a slight tap to trigger. If you are ever stuck you can put the passenger one on to get you out of trouble.
    Cheers
    JMAc
    Thats all all I do, hit the switch and let the central locking open the doors, sure when that dies I'm screwed, but till then!


    If it has an engine or heartbeat it's going to cost you. | Refer a Friend - AussieBroadband $50 Credit

  8. #8
    Join Date
    Aug 2007
    Location
    Dont poke and hope, scan, smoke and scope
    Posts
    4,423
    Users Country Flag
    Yeah thats right!!!!!!!
    Cheers
    JMAc
    Alba European
    Service, Diagnostics and repairs. Mobile Diag available on request
    Audi/VW/Porsche Factory trained tech 25+ yrs exp
    For people who value experience call 0423965341

  9. #9
    Join Date
    May 2005
    Location
    Camden, Sydney
    Posts
    7,377
    Users Country Flag
    Quote Originally Posted by Jmac View Post
    They paddle eccentric can only be bought as bigger, thicker one from VW, the old type was superceded mate.
    I get the ones from SEAT for the 2dr Ibiza and they fit in the earlier Mk3 locks.
    Camden GTI Performance. VW / AUDI Specialists
    All Mechanical Work, Log book Servicing, New and used Parts and Imports
    19-20/6 Badgally Road, Campbelltown, 2560
    02 4627 3072 or 0423 051737 www.camdengti.com

  10. #10
    Join Date
    Dec 2006
    Location
    Kilsyth, VIC
    Posts
    6,304
    Users Country Flag

    Quote Originally Posted by Golf Loon View Post
    I get the ones from SEAT for the 2dr Ibiza and they fit in the earlier Mk3 locks.
    And are bigger and stronger!


    If it has an engine or heartbeat it's going to cost you. | Refer a Friend - AussieBroadband $50 Credit

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |