Support VWWC

Page 1 of 16 12311 ... LastLast
Results 1 to 10 of 160

Thread: Billy's Mk3 GL Daily.

  1. #1
    Join Date
    May 2012
    Location
    Perth, Western Australia
    Posts
    291
    Users Country Flag

    Billy's Mk3 GL Daily.

    Well I've finally decided to create a thread for my mk3 after owning it for about a year and a bit now.

    The white GL was/is my first car, it was born in 1997 with a manual gearbox and just over 175,000kms.

    It's came a long way over the last year and a half. Here's how she looked when I picked it up back in February 2012.



    I then picked up a set of Genuine Hella all black tails from rayray,




    Then came some matching Hella indicators and dummy fogs,


    Then came the trim respray!
    I had a seriously annoying paint crack coming through on the rear bumper, so the DIY-er in me began to show again.

    I firstly sanded the crack back;

    Then the whole bumper;

    and then sprayed it black!


    I then sanded and blacked the side stripes to match,



    Eventually I got round to doing the front bar too, finishing the look for now.


    The Gloss trim is different and awesome I think!

    I also sorted some fender flares to complete the 'tough' look.


    I also picked up a set of BB5 R5's... Yes RS reps ahaha
    They where on the car for quite a while until I recently sold them to Wade (Golfballs) for his mk2.


    The mk3 is also sitting on some FK streetlines coilovers, which honestly I really enjoy. But they could go lower

    The DIY install was really fun and a great money saver!



    Well that's how the mk3 sits now, it's back on stockies now with some Falken ZE912's.
    1990 Mk2 GTI 20vt - @mk2.20vt

  2. #2
    Join Date
    May 2012
    Location
    Perth, Western Australia
    Posts
    291
    Users Country Flag Thread Starter
    But the whole reason I decided to make a thread today was because my wheels arrived!



    I'm not going to show what they are yet; but they are 16"s tall, 3 piece splits and not BBS RS ahaha the refurb will start once I take the tires off tomorrow... Hoping for 8.5/9inch rears

    Here's how the test fit went with the super meaty tires,
    Rears;


    Can't find a pic of the fronts but it's a little tucked.

    I plan on getting the wheels sorted before Day of the volkswagen this year!

    I will update this when ever I get some work done on the mk3!

    Thanks for viewing
    1990 Mk2 GTI 20vt - @mk2.20vt

  3. #3
    Join Date
    May 2012
    Location
    Perth, Western Australia
    Posts
    291
    Users Country Flag Thread Starter
    Here's a few more current pictures



    1990 Mk2 GTI 20vt - @mk2.20vt

  4. #4
    Join Date
    Aug 2013
    Location
    London
    Posts
    15
    Users Country Flag
    Looking great there buddy. An exceptionally clean MK3 base right there too. Keep up the good work

  5. #5
    Join Date
    Mar 2012
    Location
    Central Coast, NSW
    Posts
    1,428
    Looking forward to seeing those wheels!

  6. #6
    Join Date
    May 2012
    Location
    Perth, Western Australia
    Posts
    291
    Users Country Flag Thread Starter
    Quote Originally Posted by mike1990 View Post
    Looking great there buddy. An exceptionally clean MK3 base right there too. Keep up the good work
    Thanks mate!

    Quote Originally Posted by anthony--t View Post
    Looking forward to seeing those wheels!
    I can't wait to finish them, hopefully I can get the tyres off today, if not for sure on the weekend. Then I can start the refurb!
    1990 Mk2 GTI 20vt - @mk2.20vt

  7. #7
    Join Date
    Aug 2006
    Location
    Melbourne VIC
    Posts
    6,784
    Radness!

  8. #8
    Join Date
    May 2013
    Location
    Yallambie, Melbourne
    Posts
    259
    Users Country Flag
    Mk3 love! Oh and did you sand down n prime the parts you painted?

  9. #9
    Join Date
    May 2012
    Location
    Perth, Western Australia
    Posts
    291
    Users Country Flag Thread Starter
    Quote Originally Posted by junyip_69 View Post
    Mk3 love! Oh and did you sand down n prime the parts you painted?
    Thanks mate! Yeah of course! All in the preparation my friend ahaha I used a spray paint I found in bunnings, about $12-15 a tin and it worked brilliantly. I sanded the bumpers back, not to the bare texture but so there was no gloss left on the paint, then used a plastic primer made by the same company as the paints, I gave them a few coats of that. Primer was strange though as it was clear, not grey. Then I gave them a few coats of black and finally ended with a couple of layers of clear coat. Came up great for my first spray painting venture, might do the stock steelies later on for fun when the new wheels are sorted
    1990 Mk2 GTI 20vt - @mk2.20vt

  10. #10
    Join Date
    Mar 2011
    Location
    Bunvegas, Western Australia
    Posts
    387
    Users Country Flag

    So keen for you to get those wheels finished for DOVW man.
    Also, I can attest to how damn clean Billy's Mk3 is. It's silly shmick!
    1976 VW Golf "Swallowtail" - Rallye Red (long term resto)
    2009 Pirelli GTI - Stg3 killer
    2009 R36 Passat - Daily baller
    Quote Originally Posted by Peter Jones View Post
    You take corners on three wheels, and V8's can't catch you.

Page 1 of 16 12311 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |