Radiator Pipe

**ryana89** · 20-09-2010, 05:27 PM

Can't seem to find this pipe on any online store/service so thought it may be an idea to ask here. I have never seen such a complex cooling pipe setup

(Photo Courtesy of DangerDan

)
This is the pipe that I'm reffering too, it runs from the Water Pump, to the Flange in the Cylinder Head with a little pipe 'branching' off to the oil cooler to allow the return of coolant that has had heat transferred to it from the oil cooler.

I've seen nothing similar on GAP for MK2 (16V, 8V, and even MK3).
The eninge in my car is a 2E but it has all the MK2 running gear/parts on it (to my knowledge).

May have to see Golf Loon about it as I may be coming down to Sydney in the next few months.
Any help/input would be greatly appreciated

Thanks.

**Stiggy_21** · 20-09-2010, 05:40 PM

have a look on ebay uk, i remember seeing a radiator hose set on there, whether it had that hose there?

**ryana89** · 20-09-2010, 06:34 PM

Had a flick through that and not much luck, will keep looking though.
But I did get the part number off the hose (was very very hard)
037121053G

The hose in my car isn't in dire condition, but if it were to break in the middle of nowhere, the the chance of a wrecker/dealer having a pipe even remotely similar would be minute.

**h100vw** · 20-09-2010, 07:21 PM

You will be able to get that pipe from a dealer, just give them the number.

Gavin

**ryana89** · 20-09-2010, 08:06 PM

That came to mind aswell,
But thank-you for confirming it.

**walshydub** · 20-09-2010, 08:06 PM

I'd say try golfloon first, support the local guys. But if he doesn't have it;
GSF car parts, stock everything
GSF | Cheap Discount Car Parts | Euro German Japanese | VW BMW Audi Ford Peugeot
Veedubmachine. bought a lot of parts from these guys, good prices and delivery within 10 days
COOLANT HOSE FROM PUMP TO BLOCK 051121053A [051121053A] - £10.06 : veedubmachine, Volkswagen Audi Seat Skoda Porsche spares and accessories

**ryana89** · 20-09-2010, 09:18 PM

Thanks Walshy, will have a scrounge around both those sites.
But the main poblem I'm having is finding a pipe with 2 90 degree bends (as illustrated by this dodgy pic below)

Alot of the pipes dont have the final 90 bend to go towards the coolant flange on the engine head. And if they do, then they dont have the little return pipe for the oil cooler

But its early days, I'm sure Ill find somthing.