New turbo garrett GT 25/30r turbo setup

[Mk1_Citi_Golf]

If you are mounting the turbo above the gearbox, then mount an intercooler next to the turbo (see my GTD photos of a ducted intercooler mounted atop the gearbox). Also, rubber mount the turbo (like porsche do) which will stop the exaust to turbo pipe cracking. Sounds silly but it works.

[twin eng, twin turbs]

Im keen to get this going again aswell Jarred, but it takes time... Hey GTDTdiMK2 welcome to the forum, if you check the previous page i have a pic of the start of a water to air intercooler im making for it mounted above the turbo. Did you bring your scirocco over aswell???

[twin eng, twin turbs]

Heres a pic of the water to air intercooler dummy fitted in place, the two small pipes below it are for the water cooling of the core. In the pic at the top of this page you can see the turbo outlet pipe before and after being bellmouthed in this pic to blend into the end tank. Pressure tested to 50 psi without leakage. I will fully polish it soon.

[GOLFBALLS]

Goin great guns. Nice work! Have you filled out your forms for approval to the transport dept yet?!
Hate to see all that work get taken off the road for not being certified.

[twin eng, twin turbs]

Goin great guns. Nice work! Have you filled out your forms for approval to the transport dept yet?!
Hate to see all that work get taken off the road for not being certified.

Thats the easy part! Its allready fully engineer certified for all the previous mods with noise, emisions, speedo calibration etc. And i know the engineer well enough to get the certificate updated with minimal charge, no dramas