My Mk2 1.8t teasers...

[Spyda]

ah this is true im not bashing the vr6 i think there a harder swap than a 1.8t so props.

Harder how? I always thought a 1.8T swap was harder because the wires arnt plug and play.

[16v80]

he is using the qpeng (Quantum Performance Engineering) plug and play loom, makes it very easy to fit.
They also make the downpipes and i think there is a fitting guide showing you the parts required on the website.

http://www.qpeng.com

[tommymac]

he is using the qpeng (Quantum Performance Engineering) plug and play loom, makes it very easy to fit.
They also make the downpipes and i think there is a fitting guide showing you the parts required on the website.

http://www.qpeng.com

hahah not really at all, i didnt use their loom me and my mate wired it ourselves. I bought the ecu and we sat there are wired it over the space of a week so we had to sort through the loom.

i could easly upgrade to an adaptronic or autronic as we know the loom 100%

the guide is good but i didnt really use it, i used ben leach's (wiring aid) and i used boostin 20v info from vortex.