Support VWWC

Page 1 of 3 123 LastLast
Results 1 to 10 of 24

Thread: MK2 Golf Rear Windows desperately need door/window rubber profile - leaking!

  1. #1
    Join Date
    Oct 2010
    Location
    Melbourne
    Posts
    19

    MK2 Golf Rear Windows desperately need door/window rubber profile - leaking!

    Hi guys,
    hope I havent missed this addressed somewhere else.
    I've got a mk2 1990 Golf GTI which is good nick apart from some sections of rubber.
    I've been trying to track down a replacement to the section of rubber that sits against the rear passengers window (outside of car), pressing against it creating a seal so water can't get through to the door lining. For some reason - shrinking or it fell out - I'm missing about an inch on both sides. Front seals are fine.
    Attached pics - with shots of the profile and gaffa covering the hole.
    Any tips as to where I can go to replace this would be greatly appreciated.
    Tried Clark rubber, and a bunch of guys on the NSW South Coast, and a couple of dead ends in Melbourne.
    Thanks!





  2. #2
    Join Date
    Feb 2010
    Location
    Canberra
    Posts
    344
    Users Country Flag
    If you find anywhere that has them let me know, I don't think I've ever seen a Mk2 without shrunken seals
    85' MKII GOLF GTI - GTI 85T - First cruise was 4000km in 2.5 days. It's Evolving!

    06' MkV JETTA TDI - Stock To Shock

  3. #3
    Join Date
    May 2010
    Location
    NQ
    Posts
    1,118
    Users Country Flag
    Have the exact same issue with both the rear window rubbers on my car.
    It just drains out the bottom of the door on the outside.
    MK2 - *Insert list of dealer purchased extra's/standard features here*
    80 series - The MK2's BIG, Sooty, polar opposite...
    HAHAHA

  4. #4
    Join Date
    May 2005
    Location
    Camden, Sydney
    Posts
    7,377
    Users Country Flag
    All Aussie ones are shrunken. Either find some in a cold country, like the UK, or buy them from VW here if you can find someone in the dealership who cares about your Mk2.
    Camden GTI Performance. VW / AUDI Specialists
    All Mechanical Work, Log book Servicing, New and used Parts and Imports
    19-20/6 Badgally Road, Campbelltown, 2560
    02 4627 3072 or 0423 051737 www.camdengti.com

  5. #5
    Join Date
    Oct 2009
    Location
    Melbourne
    Posts
    150
    Matt's right, I got a set the last time I was home in Ireland. Cost me 40 euro and slipped them back in my luggage. Jump on a UK or Irish forum and I'm sure you'll get sorted out.

    I got mine through VAGdrivers

  6. #6
    Join Date
    Oct 2010
    Location
    Melbourne
    Posts
    19
    Thread Starter

    seals

    Dang it, sounds trickier that I thought. Thanks for the link, I'll try VAGdrivers.
    Apparently there's a guy out in Bungendore NSW you apparently has 400 VW's in a big ol wrecking yard, might see if he can help. Otherwise I might have to just beef up the plastic inner or fabricate an insert to keep the rain out.

    Edit
    The guy out in Bungendore is Nick from Volksparts Canberra.
    He's on 02 6238 1686 and 0412 345 121.
    You can pick up from him and he also ships. He mostly wrecks MK1 golfs and air cooled dubs but some MK2 parts.
    Last edited by gaf; 06-01-2011 at 03:05 PM. Reason: further info

  7. #7
    Join Date
    Feb 2010
    Location
    Canberra
    Posts
    344
    Users Country Flag
    Quote Originally Posted by gaf View Post
    Apparently there's a guy out in Bungendore NSW you apparently has 400 VW's in a big ol wrecking yard
    I live like 10 minutes from there. If you get his number let me know, I want to see this place
    85' MKII GOLF GTI - GTI 85T - First cruise was 4000km in 2.5 days. It's Evolving!

    06' MkV JETTA TDI - Stock To Shock

  8. #8
    Join Date
    Jun 2006
    Location
    Hornsby
    Posts
    520
    Email vintage rubbers, also Chinese jetta's seals are useable on a mk2 I just don't know how to get them??
    90 GTI Mk2 1.8t soon to be with GT28rs

  9. #9
    Join Date
    Sep 2009
    Location
    Heidelberg, Vic
    Posts
    163
    I was in China last week, I travel often on business through China. I actually took a very close look at the jetta your talking about (they have several "jettas" on the road, with varying names) as I also need rubbers, the model in question was produced up until 4 or 5 years ago and it clearly has Mk2 doors

    The seals however are thicker and have been changed a touch to give a more modern look; I will chat to a mate in China and see what i can do to source a couple, I was thinking if I could find the actual seal and buy a bulk amount its probably the best way to go

    let me see what I can find out

    Dave
    1990 MK2 GTI
    2009 MY10 Tiguan 147
    2010 MK6 GTI

  10. #10
    Join Date
    Mar 2009
    Location
    Melbourne
    Posts
    114

    I would definately be interested if you were able to source something Dave. Keep us posted mate!

Page 1 of 3 123 LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |