1990 1.8lt, 8v donk? It's idling high

[Ryan]

Hi rocco, have'nt got one yet still trying to find download, there must be one out there!!! failing that i'll have to buy it. . still that's good info that Peter found, but a parts cataloge with #'s would be better.

Yeh wabit found that info on the russian site.

[Ryan]

Also I used a screw driver to pry the injector out enough to detach the fuel line so there was enough space between the head and the intake manifold to remove the injector completely. finding the upper and lower seals buggered is it worth removing the whole injector housing for inspection? If so how is this done?

[Golf Loon]

I think the injector goes straight into the head. There is no housing to remove. Change the seals and you`ll probably find that sorts your prob. Dont force the injectors with that screwdriver. Nothing worse than a snapped one.

[Ryan]

Only a few forcefull words were givin nothing to physical

[Golf Loon]

Nice pics man, did you solve the prob yet?

[Ryan]

Nah mate, waiting till mid monday for seals from Sydney to get sent up

[roccodingo]

I think the injector goes straight into the head. There is no housing to remove. Change the seals and you`ll probably find that sorts your prob. Dont force the injectors with that screwdriver. Nothing worse than a snapped one.

From memory the air shrouded injector seats come out by using a allen key socket the correct size, this unscrews the top section, there is another section that is underneath the screw in part. You may not have to remove these parts if the seal under the seats is OK.

Be careful as these bits are rather brittle and break easily, then ya have to replace more darn partz...

[Ryan]

cheers rocco, i thought thats what i saw on the audi parts diagram when ordering cose i've got 4 seals 4 each injector being sent, guess it would be ok if i just replaced the upper and lower first and see what happens? opening a new can of worms 4 nothing is what i'm good at most of the time :roll:

[Golf Loon]

Yeah leave the seats alone unless you are rebuilding the head.

[Ryan]

Yep :!: Fingers crossed for monday