Support VWWC

Results 1 to 7 of 7

Thread: Which wheels? Decisions, decisions, decisions!

  1. #1
    Join Date
    Oct 2011
    Location
    St Kilda Road, Melbourne
    Posts
    18
    Users Country Flag

    Which wheels? Decisions, decisions, decisions!

    Has anyone got any advice/opinions on what wheels I should throw on my mk1? I want my golf slammed to the floor and on 13's, was thinking some deep dish 13x7's, but how much arch work will be needed? Plus I want stretch look for the tyres but don't want to spend a million $'s!

    What sizes should I be looking at?

    Thanks in advance guys!

  2. #2
    Join Date
    Oct 2007
    Location
    Bairnsdale & Ferntree Gully, Victoria
    Posts
    7,491
    stretching tyres don't cost any more then normal unless you get weird sizes.
    if you want 7s you need to work out your offset. width alone means nothing...

    Then once you have the offset, im sure some of the mk1 guys could tell you what size tyres you will need to clear guards etc

  3. #3
    Join Date
    Oct 2011
    Location
    St Kilda Road, Melbourne
    Posts
    18
    Users Country Flag Thread Starter
    ET-7 is the offset on the wheels I've been looking at. Unsure of the arch work required to get them to fit. I'm going to be getting coilovers that lower 120mm and I was hoping to run them as low as they will go with those wheels on.

  4. #4
    Join Date
    Jul 2005
    Location
    Newcastle, NSW
    Posts
    4,304
    Users Country Flag
    7" with -7 offset is about 20mm more poke than a normal fitment 15" which is about -28.

    I'd imagine without some guard work your not going to get them on and that low as the guards don't have the width required.

    I run 7" -28 with a 10mm spacer on rear and (ie. -1 and it's 'close' to the guard when low.

    But I could be proven wrong.
    Last edited by mikinoz; 02-01-2012 at 10:36 AM.

  5. #5
    Join Date
    Oct 2007
    Location
    Bairnsdale & Ferntree Gully, Victoria
    Posts
    7,491
    Quote Originally Posted by mikinoz View Post
    7" with -7 offset is about 20mm more poke than a normal fitment 15" which is about -28.

    I'd imagine without some guard work your not going to get them on and that low as the guards don't have the width required.

    I run 7" -28 with a 10mm spacer on rear and (ie. -1 and it's 'close' to the guard when low.

    But I could be proven wrong.
    you mean your running 7"et18 mikinoz? not et-18...?

  6. #6
    Join Date
    Jul 2005
    Location
    Newcastle, NSW
    Posts
    4,304
    Users Country Flag
    Quote Originally Posted by dylan8 View Post
    you mean your running 7"et18 mikinoz? not et-18...?
    Probably, I was not really using et, more simply the measurement from centre. I was of the understanding towards the outer lip was negative and the inner positive?

    All the same, the wheels are et28 with a 10mm spacer to et18 then I'd assume based on the above.

    Sorry of I have confused anyone.

  7. #7
    Join Date
    Oct 2011
    Location
    St Kilda Road, Melbourne
    Posts
    18
    Users Country Flag Thread Starter

    Offsets always confuse me! Im going to get them ordered I think and just make them fit! Any ideas on tyre size and availability for that stretched look? The 14x6's I've got for sale at the moment are a nightmare to get small tyres for here, in Europe no problem! Stupid Euro sizes!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |