Reboring rims

[marcoz]

Hey guys i bought some bbs wheels and the centre bore is too small on them any idea how to fit them or where i can get them machined out? if not ill just sell them! cheers

[Jarred]

a location would be helpful.

[marcoz]

Whoops hornsby area sydney but i dont mind going around syd.

[marcoz]

anyone?

[brad]

Neale Wheels
Mullins
BSA
possibly Simmons
possibly OTR
Coastal?

Any machine shop should be able to do it as well

IIRC, when I was thinking about an 8mm slice off the hub on some BBS's it was about $35-$45 a wheel but they needed to see it to ascertain if there was enough metal on the hub to do it safely.

[marcoz]

Neale Wheels
Mullins
BSA
possibly Simmons
possibly OTR
Coastal?

Any machine shop should be able to do it as well

IIRC, when I was thinking about an 8mm slice off the hub on some BBS's it was about $35-$45 a wheel but they needed to see it to ascertain if there was enough metal on the hub to do it safely.

yeah i called BSA and they said $35 a wheel so i think im going to head over there when i get some more money ahah

[brad]

Work out whether your offset is OK too - it won't be much more to get that sorted at the same time.

[marcoz]

Work out whether your offset is OK too - it won't be much more to get that sorted at the same time.

im no good with wheels at all i know the offset is +55, 7" wide do you think they will fit?

[brad]

As you haven't said what car you are putting them on, I can't even begin to guess.

[marcoz]

As you haven't said what car you are putting them on, I can't even begin to guess.

oh hahah my mk4 golf